ODIS 4.3.3 function? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: ODIS 4.3.3 function? (/showthread.php?tid=38084) |
ODIS 4.3.3 function? - kooki4941 - 06-08-2018 Hi Everyone I installed ODIS 4.3.3 and connected car. Good working. And i run ODIS 4.3.3 program. But only two option can use it. Another option can not use it? i want to use this option,,,, how can i do? Regards and i try to other option but i meet this faulty message,,,,,,what means this faulty message? RE: ODIS 4.3.3 function? - turp9 - 06-08-2018 Right click on module and identify control module. After that other options still disabled? Try can gateway first. Module 19 RE: ODIS 4.3.3 function? - kooki4941 - 06-08-2018 (06-08-2018, 11:32 AM)turp9 Wrote: Right click on module and identify control module. After that other options still disabled? thank you for your advice and i will try and then i will let you know. Regards RE: ODIS 4.3.3 function? - kooki4941 - 09-08-2018 (06-08-2018, 17:01 PM)kooki4941 Wrote:(06-08-2018, 11:32 AM)turp9 Wrote: Right click on module and identify control module. After that other options still disabled? hi i tried by your advice. but still same problem,... and how can i do? RE: ODIS 4.3.3 function? - turp9 - 10-08-2018 Are you able to access any other module at all after clicking identify control module? Are you sure that adaptive curise control is installed on this car? Try to identify and check DTC memory on modules 19 and MOT_01 for example. |