+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: Peugeot RCZ: what hardware do I need to read map / remap! (/showthread.php?tid=38645)
Pages:
1
2
Peugeot RCZ: what hardware do I need to read map / remap! - IamAlexMeijer - 21-08-2018
Hi all,
I wonder what hardware / chip I would need to read a 2012 Peugeot RCZ 207RC 1.6T engine.
Mpps v16 cannot read it and I was looking into buying something else but what do I need? Kess v2? Something else?
RE: Peugeot RCZ: what hardware do I need to read map / remap! - adamos_22 - 21-08-2018
Hi Mate,
try with GALETTO
RE: Peugeot RCZ: what hardware do I need to read map / remap! - IamAlexMeijer - 21-08-2018
(21-08-2018, 19:41 PM)adamos_22 Wrote: Hi Mate,
try with GALETTO
It’s not in the support list unfortunately
RE: Peugeot RCZ: what hardware do I need to read map / remap! - zmann - 22-08-2018
(21-08-2018, 19:48 PM)IamAlexMeijer Wrote:(21-08-2018, 19:41 PM)adamos_22 Wrote: Hi Mate,
try with GALETTO
It’s not in the support list unfortunately
Did you check your ECU Bosch number ? Read/write in boot mode and why not Galletto (FGtech) support ?
RE: Peugeot RCZ: what hardware do I need to read map / remap! - IamAlexMeijer - 22-08-2018
(22-08-2018, 05:45 AM)zmann Wrote:(21-08-2018, 19:48 PM)IamAlexMeijer Wrote:(21-08-2018, 19:41 PM)adamos_22 Wrote: Hi Mate,
try with GALETTO
It’s not in the support list unfortunately
Did you check your ECU Bosch number ? Read/write in boot mode and why not Galletto (FGtech) support ?
Support List: http://www.obd2repair.com/download/ECU%20Chip%20Tuning/Galletto%201260%20Car%20List.pdf
Support List:
http://www.obdexpress.co.uk/upload/pro/fgtech-galletto-2-eobd-car-list.pdf
psa
edc16c34 obd r/w ok
dcm 3.4 obd r/w ok
ITs a MED17.4.2
RE: Peugeot RCZ: what hardware do I need to read map / remap! - Isooow - 22-08-2018
You need Kess, it will read write MED17.4.2 via OBD.
RE: Peugeot RCZ: what hardware do I need to read map / remap! - IamAlexMeijer - 28-08-2018
(22-08-2018, 18:02 PM)Isooow Wrote: You need Kess, it will read write MED17.4.2 via OBD.
Just got my kess today and doesn’t connect to RCZ. Does with any other car though
RE: Peugeot RCZ: what hardware do I need to read map / remap! - zmann - 29-08-2018
(22-08-2018, 06:17 AM)IamAlexMeijer Wrote:(22-08-2018, 05:45 AM)zmann Wrote:(21-08-2018, 19:48 PM)IamAlexMeijer Wrote:(21-08-2018, 19:41 PM)adamos_22 Wrote: Hi Mate,
try with GALETTO
It’s not in the support list unfortunately
Did you check your ECU Bosch number ? Read/write in boot mode and why not Galletto (FGtech) support ?
Support List: http://www.obd2repair.com/download/ECU%20Chip%20Tuning/Galletto%201260%20Car%20List.pdf
Support List:
http://www.obdexpress.co.uk/upload/pro/fgtech-galletto-2-eobd-car-list.pdf
psa
edc16c34 obd r/w ok
dcm 3.4 obd r/w ok
ITs a MED17.4.2
Hmmm....You were looking at outdated FG Galletto !
RE: Peugeot RCZ: what hardware do I need to read map / remap! - Isooow - 02-09-2018
(28-08-2018, 15:31 PM)IamAlexMeijer Wrote:(22-08-2018, 18:02 PM)Isooow Wrote: You need Kess, it will read write MED17.4.2 via OBD.
Just got my kess today and doesn’t connect to RCZ. Does with any other car though
Original Kess or clone?
RE: Peugeot RCZ: what hardware do I need to read map / remap! - IamAlexMeijer - 18-08-2019
(02-09-2018, 14:33 PM)Isooow Wrote:(28-08-2018, 15:31 PM)IamAlexMeijer Wrote:(22-08-2018, 18:02 PM)Isooow Wrote: You need Kess, it will read write MED17.4.2 via OBD.
Just got my kess today and doesn’t connect to RCZ. Does with any other car though
Original Kess or clone?
was a clone... i'm saving up for original one.