PSA BSI VALEO N03-00 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: PSA BSI VALEO N03-00 (/showthread.php?tid=39067) |
PSA BSI VALEO N03-00 - Stefano G - 01-09-2018 Hi, on a PSA BSI VALEO SC667152+95256 CAN BSI-N03-00 the VIN number is written on the eeprom, like pincode? Vehicle: Peugeot 208 Thanks RE: PSA BSI VALEO N03-00 - volavka - 01-09-2018 Yes in eeprom and NOT crypted well Good luck .. RE: PSA BSI VALEO N03-00 - Stefano G - 01-09-2018 (01-09-2018, 18:25 PM)volavka Wrote: Yes in eeprom and NOT crypted well OK, so making eeprom virgin I can then write the VIN and the pincode with the diagbox as if the bsi were new? I have to replace a broken bsi with another one and I want to understand if it is better to clone it or to make eeprom virgin and then write VIN and pincode with diagbox. Thanks RE: PSA BSI VALEO N03-00 - volavka - 01-09-2018 (01-09-2018, 18:47 PM)Stefano G Wrote: OK, so making eeprom virgin I can then write the VIN and the pincode with the diagbox as if the bsi were new? YES ....... (01-09-2018, 18:47 PM)Stefano G Wrote: I have to replace a broken bsi with another one and I want to understand if it is better to clone it or make it virgin and then write VIN and pincode with diagbox. Cloning eeprom would be much easier RE: PSA BSI VALEO N03-00 - CHIKODIAG - 01-09-2018 HI if you have the old bsi just do a clone it will save you a lot of time and reconfigration good luck RE: PSA BSI VALEO N03-00 - Stefano G - 01-09-2018 (01-09-2018, 18:59 PM)CHIKODIAG Wrote: HI Yes, I have the old bsi that is working but not communicate with the LIDAR calculator and the diagbox says "replace the bsi". RE: PSA BSI VALEO N03-00 - Stefano G - 02-09-2018 For curiosity, what kind of data is there inside microcontroller flash SC667152 instead? |