+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: bsi valeo citroen c3 help ford read micro (/showthread.php?tid=39195)
Pages:
1
2
bsi valeo citroen c3 help ford read micro - javi225 - 06-09-2018
Hello, I need help, I recently bought programmer vvdi prog, and I need to read micro mc9s12dp512 from a bsi citroen c3 valeo .... I do not know how to connect to read can you help me ?? Can you read on the plate?
thanx advance.
RE: bsi valeo citroen c3 help ford read micro - rusy1010 - 06-09-2018
Try this connection
RE: bsi valeo citroen c3 help ford read micro - volavka - 06-09-2018
Why need to read MCU ?
RE: bsi valeo citroen c3 help ford read micro - rusy1010 - 06-09-2018
(06-09-2018, 19:12 PM)volavka Wrote: Why need to read MCU ?
I think after reading the PIN through FVDI
RE: bsi valeo citroen c3 help ford read micro - javi225 - 07-09-2018
(06-09-2018, 19:12 PM)volavka Wrote: Why need to read MCU ?
the truth is that I do not know the process to clone bsi ... but I read the epprom and I copied it to the other bsi, but there is no communication ... that's why I think the problem may be that you have to read too the mcu ... is not it? Can you explain the correct process? Thank you.
RE: bsi valeo citroen c3 help ford read micro - volavka - 07-09-2018
(07-09-2018, 11:37 AM)javi225 Wrote: the truth is that I do not know the process to clone bsi ... but I read the epprom and I copied it to the other bsi, but there is no communication ... that's why I think the problem may be that you have to read too the mcu ... is not it? Can you explain the correct process? Thank you.
Enough cloning eeprom ,, but are you sure eeprom data is not corrupted ?
Please Post eeprom dump here , will check it
Good luck
RE: bsi valeo citroen c3 help ford read micro - javi225 - 07-09-2018
(06-09-2018, 18:40 PM)rusy1010 Wrote: Try this connection
thanks for your help, still can not read for lack of time ... to clone bsi better fvdi ??
RE: bsi valeo citroen c3 help ford read micro - volavka - 07-09-2018
(07-09-2018, 11:43 AM)javi225 Wrote:(06-09-2018, 18:40 PM)rusy1010 Wrote: Try this connection
thanks for your help, still can not read for lack of time ... to clone bsi better fvdi ??
Clone only by eeprom programmer or swap it to new bsi
Good luck
RE: bsi valeo citroen c3 help ford read micro - javi225 - 07-09-2018
(07-09-2018, 11:42 AM)volavka Wrote:(07-09-2018, 11:37 AM)javi225 Wrote: the truth is that I do not know the process to clone bsi ... but I read the epprom and I copied it to the other bsi, but there is no communication ... that's why I think the problem may be that you have to read too the mcu ... is not it? Can you explain the correct process? Thank you.
Enough cloning eeprom ,, but are you sure eeprom data is not corrupted ?
Please Post eeprom dump here , will check it
Good luck
ok, this afternoon i upload file for test, also try an eeprom change from bsi broken to bsi scrap.
thax
RE: bsi valeo citroen c3 help ford read micro - volavka - 07-09-2018
(07-09-2018, 11:55 AM)javi225 Wrote: also try an eeprom change from bsi broken to bsi scrap.
Yes !
