+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Opel Astra 1.8 Z18XE simtec 71.1 (/showthread.php?tid=39417)
Opel Astra 1.8 Z18XE simtec 71.1 - filxomor - 13-09-2018
Hi
please, if possible I need to disable the second lambda sensor
errors p0136 p 0141
Opel Astra 1.8 Z18XE simtec71.1
HW: 55557459
SW: 6577925
VIN nr.: W0L0TGF6915098944
SW ver.: M2P5102A
Spare:
Engine: Z18XE
Ver.HW: SIE 011610200
SW upg.: S01001
RE: Opel Astra 1.8 Z18XE simtec 71.1 - volodea - 15-09-2018
Hello, on a partial flash dump? The full flash has 256kb, not 24kb. Cannot do this on your file. Sorry
RE: Opel Astra 1.8 Z18XE simtec 71.1 - Ashraf6119 - 15-09-2018
Any good reason to disable the lambda sensor............? Do you know by disabling the lambda sensor you will only not have a warning light but, the vehicle will still not run as it should be running..............
RE: Opel Astra 1.8 Z18XE simtec 71.1 - snyper - 19-09-2018
(15-09-2018, 06:25 AM)volodea Wrote: Hello, on a partial flash dump? The full flash has 256kb, not 24kb. Cannot do this on your file. Sorry
Hello, am interested in this thread. How do can one read the dumps off a Simtec ECU? They are sealed, and I tried openning one, it almost broke to unrecoverable.
I want to re-flash mine, they bring no immobilizer light, and I think they have a different software version.
Regards
RE: Opel Astra 1.8 Z18XE simtec 71.1 - volodea - 21-09-2018
Simtec 71/71.1 are wellknown for bad wires inside. Your problem might be inside of the ecu. All the common tools read only a part of the flash and if you try to write them, you will get them blocked. You need a tool that read/write whole flash. If you were from Romania, i have could help you. No need to open it for reading, there is almoast impossible to find the bdm reading points on that pcb.
RE: Opel Astra 1.8 Z18XE simtec 71.1 - snyper - 21-09-2018
Thank you. So, I gather, that being the Simtec 71.5, it cannot work on a zafira a.