BMW ME9.2 Clone - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: BMW ME9.2 Clone (/showthread.php?tid=39540) |
BMW ME9.2 Clone - syrus - 16-09-2018 Hey guys, i have cloned my ME9.2 DME of my drift car (N62B44) with KTAG! When i connect the orig DME into the car, the engine make some noize of some valves - if i connect the cloned DME, i hear nothing - with the orig DME i can start the Vehicle but with the cloned one not! Has anyone a idea? RE: BMW ME9.2 Clone - ROD-BENDERS - 16-09-2018 (16-09-2018, 07:41 AM)syrus Wrote: Hey guys, Maybe with cloned dme you need to re-synch the immo with diag tool RE: BMW ME9.2 Clone - jvegca1 - 16-09-2018 you need to copy isn RE: BMW ME9.2 Clone - syrus - 16-09-2018 (16-09-2018, 13:59 PM)jvegca1 Wrote: you need to copy isn ISN from DME > CAS? (How can i find ISN in the read out) How can i read out CAS? (= BMW E61 545i) The two ECUs are now cloned - copied ... i wonder why the actual ISN is not copied from the donor ECU into the clone... Isn´t it...? RE: BMW ME9.2 Clone - Enabled - 17-09-2018 Please post the hardware part numbers of the original and the clone dmes. There are many versions of BMW ME9.2, and if you clone data into wrong hardware, it will not work. Been there, done that. Get the correct dme hardware, then the clone will work fine. No need to sync if cloned correctly, with BDM. Any codes right now? RE: BMW ME9.2 Clone - Danchik - 17-09-2018 Hi if you have 28f800 there may-be 2 28f200 Work with it xprog Goodluck |