+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Digital cruise control display not always working (/showthread.php?tid=39911)
Digital cruise control display not always working - Freddy1 - 24-09-2018
I often came to this problem, if you do a cruise control retrofit on some cars, with low cluster/kombi, and do the 540/544 coding, it should activate TEMPOMAT_SETZ_ANZ_DAUER wert_02 (and a few other values). But often it doesn´t work. For example:
A X1 E84 with no cruise control gets a new SZL with 544 (Dynamic Cruise Control), but still has the low kombi, everything works fine, except the display, if the cruise control gets activated. Sometimes I could get it working after updating it with WinKFP, and sometimes I also rewrote the EEPROM with a dump that has the cruise control display, which worked, but that´s takes too much time.. Is there another method, except switching to a high kombi?
RE: Digital cruise control display not always working - smercki - 25-09-2018
I have same problem, but not found solution....
RE: Digital cruise control display not always working - Freddy1 - 25-09-2018
Too bad, I don´t know what´s the issue behind that? I would understand if the kombi is from 2004 or 2005 and you just can´t code it. But in my case it was one from 2015. Or is it because of different manufactures, like VDO and Siemens?