CarTechnoloGY
F30 Used FEM - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F30 Used FEM (/showthread.php?tid=40408)



F30 Used FEM - Impac - 04-10-2018

Hey guys i need some help, 2012 F31 320d FEM FAILED is there any way to recover it or fix it ? And if so whicch TOOL to use ? Basically, NO IGNITON,  Start/Stop blinks, no response from key fob, Navigation works, Taillights on all the time, is there a tool to fix FEM , 

And is there a tool to program/ install a USED FEM incase it’s necessary, i know a new FEM is no problem

Also ISTA+ does NOT connect but ISTA P CONNECTED,  but battery died and did not have PowerSupply on hand

Thanks for any help


RE: F30 Used FEM - bmwcoder75 - 04-10-2018

Used Fem car wont even have ignition to come on
Bench job since CAS is builtin
New FEM are cheap. I pay 400 euro for new F3x FEM


RE: F30 Used FEM - Impac - 04-10-2018

Car dont have ignition with original/failed FEM or the used one, now what tool can be used to fix it on bench ? If possible to fix i’d like to try it


RE: F30 Used FEM - bmwcoder75 - 04-10-2018

(04-10-2018, 16:31 PM)Impac Wrote:  Car dont have ignition with original/failed FEM or the used one, now what tool can be used to fix it on bench ? If possible to fix i’d like to try it

You need eeprog readers/writers for CAS chip etc
You may need software like BMW Explorer.
Unless you are a professional garage makes no sense getting into those.

(04-10-2018, 16:31 PM)Impac Wrote:  Car dont have ignition with original/failed FEM or the used one, now what tool can be used to fix it on bench ? If possible to fix i’d like to try it

You need eeprog readers/writers for CAS chip etc
You may need software like BMW Explorer.
Unless you are a professional garage makes no sense getting into those.