Help update i-level BMW Motorrad Bike - K24 Series ? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Help update i-level BMW Motorrad Bike - K24 Series ? (/showthread.php?tid=40526) |
RE: Help update i-level BMW Motorrad Bike - K24 Series ? - HaakonA - 20-10-2018 Nerox The bike has been serviced in 2018, presumably by an official Motorrad Dealer so that does mean there is the possibility of a more recent iLevel for K024 than is in ISTA-P 3.65, you should be able to get the details of firmware level in each ECU from ISTA & that info could determine which ECU's have been updated, it is a bit of a pain getting the details using ISTA compared to GS911 which gives all the details with one autoscan RE: Help update i-level BMW Motorrad Bike - K24 Series ? - 14TLC - 22-10-2018 (20-10-2018, 01:30 AM)HaakonA Wrote: Nerox Yes, good starting point. Maybe someone tried to put some module from different bike and made a mess. I believe that I Level overview in ISTA/P are correct and for these models there is no change in 2 years. These are old models. I have seen some minor patch versions installed by BMW because of some issue on the motorcycle, not listed as official release. Only difference in the last three digits of the I Level version. RE: Help update i-level BMW Motorrad Bike - K24 Series ? - inspi1981 - 22-10-2018 Change the I-level to correct one with tool32 And post VIN, then can be checked on BMW server RE: Help update i-level BMW Motorrad Bike - K24 Series ? - Nerox - 27-10-2018 @inspi1981 Thanks for your reply Vin is VIN number for the bike is WB10B0304DZ048282. I haven't figured out how to get Tool32 to work properly though... I don't understand why since ista-d/P works great ! I've done some research but it didn't solve my issue :/ RE: Help update i-level BMW Motorrad Bike - K24 Series ? - inspi1981 - 29-10-2018 Bike was at dealer only once in 2014 and left with K024-13-02-510. So somebody must make mess with I-level later. Fix it with Tool32 RE: Help update i-level BMW Motorrad Bike - K24 Series ? - Nerox - 30-10-2018 @Inspi Thanks for checking the service history ! RE: Help update i-level BMW Motorrad Bike - K24 Series ? - Nerox - 02-11-2018 (29-10-2018, 09:01 AM)inspi1981 Wrote: Bike was at dealer only once in 2014 and left with K024-13-02-510. So somebody must make mess with I-level later. Fix it with Tool32 Could you give me/us some insight on the HOW to change that with Tool32? (or any other tool) I've played a bit with tool32 but... i've to admit i'm a bit loss. Ncs is now working fine though |