+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: 2015 peugeout 208 abs configuration (/showthread.php?tid=40541)
2015 peugeout 208 abs configuration - iky786 - 07-10-2018
Hi there.
I working on a Peugeot 208 1.6 HDi 2015 with VIN: VF3CC9HP0FT035392
Car got ABS fault, ABS pump has been changed old was damaged in crash, ABS pump has been changed with matching part numbers car, now starts.
Trying to do configuration off used pump but communication error, checked all wiring, it seems all fine in.
I am using Diagbox 9.34 online, when scanning the car it says ABS pump not recognized, but when you click on it you can see pump data etc and model name.
In ABS pump i get fault code BSI operating fault U1318 communication error.
I have checked CAN-Bus wiring for voltage, seems fine on 2 sets off wire, i get 2.5V.
On other sets of CAN-Bus wiring there is no volts from the car side but voltage coming from ABS pump around 9V.
I have managed to get the ABS pump light and traction control light off, some calibration off gyro sensor.
But can't get the TPMS light off. does anyone no the location off TMPS think this is fried
Any help would be great.
Thanks.
RE: 2015 peugeout 208 abs configuration - apol - 18-10-2018
TPMS in 208 is indirect over ESP there no sensors in wheels and no reciver