+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: ktag checksum error at edc17c19 (/showthread.php?tid=40665)
ktag checksum error at edc17c19 - victorysatgr - 10-10-2018
hello
i have a problem with my reworked ktag 7.020, i cant read-write bosch edc17c19 ...always ch error , i have try different's ksuite s/w , nothing... i install c++ 2005, 2008, 2010 netframe 3.5...
i use full charged battery 7ah 12v (13.8v) nothing...
old ecu read-write fine.... i read in forums that the ktag read-write fine that ecu... what may is the problem of mine ktag? (i use win7 x64 and try also on win xp)
RE: ktag checksum error at edc17c19 - QuantumECU - 11-10-2018
KSuite version?
RE: ktag checksum error at edc17c19 - victorysatgr - 11-10-2018
(11-10-2018, 03:59 AM)QuantumECU Wrote: KSuite version?
KSuite 2.23..
RE: ktag checksum error at edc17c19 - 4nubis - 11-10-2018
(11-10-2018, 05:24 AM)victorysatgr Wrote:(11-10-2018, 03:59 AM)QuantumECU Wrote: KSuite version?
KSuite 2.23..
Try this version...
https://cartechnology.co.uk/showthread.php?tid=35721
Sorry...only for kess
RE: ktag checksum error at edc17c19 - torixon91 - 12-10-2018
I had a lot of time this problem. Try to read flash with galletto. Then write this with KTAG.
Then you will have 100% working ecu.
It's often when you are tuning the ecu after someone
RE: ktag checksum error at edc17c19 - victorysatgr - 12-10-2018
my problem now is ktag with ksuite 2.23 can't write that ecu...(edc17c19)
it show's me that writing successfully .... but in 10-15 sec? no way.... eeprom read-write fine
but flash not... i think is a software problem of ksuite (my ktag is reworked)....
i read that many user's read - write that ecu with clone with success...
RE: ktag checksum error at edc17c19 - autronix - 12-10-2018
try installing ksuite 2.23 on different PC. sometimes it helps.
RE: ktag checksum error at edc17c19 - victorysatgr - 13-10-2018
(12-10-2018, 19:38 PM)autronix Wrote: try installing ksuite 2.23 on different PC. sometimes it helps.
i try in a laptop..... the same......