CarTechnoloGY
N43B16 TO N43B20 HELP ECU FILE PLEASE - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: N43B16 TO N43B20 HELP ECU FILE PLEASE (/showthread.php?tid=40698)

N43B16 TO N43B20 HELP ECU FILE PLEASE - marcoskynet - 11-10-2018

HELLO
AFTER ENGINE FAILURE
WE HAVE SWAP ENGINE ( BMW 1 E81) FROM N43B16 TO  N43B20
ECU STILL FROM 1.6
CAR RUNS !
SOMEONE CAN MADE OR HAVE FILE FOR 2.0 ENGINE
ECU CONTINETAL
HW:07621178
SW:07635306
COPY OF ECU FILE 1.6 ENGINE BELOW under

RE: N43B16 TO N43B20 HELP ECU FILE PLEASE - QuantumECU - 11-10-2018

WinKFP the best solution

RE: N43B16 TO N43B20 HELP ECU FILE PLEASE - rs@chip - 11-10-2018

I ve done this also on same car..I flashed with cmd 2.0 files I had first 2 or 3 times and always dtcs present becouse softwere mismatch.at the end I changed FA and flash ecu with corect zusb file and finaly car run perfect..like Quantum Ecu sayed KFP best solution

RE: N43B16 TO N43B20 HELP ECU FILE PLEASE - Enabled - 12-10-2018

+1

WinKFP for perfect factory integration.

RE: N43B16 TO N43B20 HELP ECU FILE PLEASE - smotorsport - 14-07-2022

(11-10-2018, 23:49 PM)rs@chip Wrote:  I ve done this also on same car..I flashed with cmd 2.0 files I had first 2 or 3 times and always dtcs present becouse softwere mismatch.at the end I changed FA and flash ecu with corect zusb file and finaly car run perfect..like Quantum Ecu sayed KFP best solution

Hi, I've also swapped 116i to 120i n43b20. Now car is with original ecu and starts and runs but I want to flash the n43b20 file with winkfp. What should I change in FA so winkfp recognizes it as 120i? Thanks!

RE: N43B16 TO N43B20 HELP ECU FILE PLEASE - ravager - 16-07-2022

(14-07-2022, 09:15 AM)smotorsport Wrote:  
(11-10-2018, 23:49 PM)rs@chip Wrote:  I ve done this also on same car..I flashed with cmd 2.0 files I had first 2 or 3 times and always dtcs present becouse softwere mismatch.at the end I changed FA and flash ecu with corect zusb file and finaly car run perfect..like Quantum Ecu sayed KFP best solution

Hi, I've also swapped 116i to 120i n43b20. Now car is with original ecu and starts and runs but I want to flash the n43b20 file with winkfp. What should I change in FA so winkfp recognizes it as 120i? Thanks!

where are you from? I can help look with kfp