+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: need checksum Bosch m5.2.1 (/showthread.php?tid=40710)
need checksum Bosch m5.2.1 - torixon91 - 11-10-2018
Hi guys,
my tools are not covering this file.
could you please calculate the checksum or share the soft with me
bin attached
RE: need checksum Bosch m5.2.1 - rch11 - 12-10-2018
(11-10-2018, 22:35 PM)torixon91 Wrote: Hi guys,Try and raport
my tools are not covering this file.
could you please calculate the checksum or share the soft with me
bin attached
RE: need checksum Bosch m5.2.1 - torixon91 - 12-10-2018
went to 97% with galletto v54 (only possibly tool to write this ecu) and bricked ecu.
Now I try to put original but it is failing at 97%
any working solution? desoldering not possible since the memory is glued to the board
RE: need checksum Bosch m5.2.1 - Enabled - 12-10-2018
Is this with a boot mode processor/flash chip?
Desoldering is not too bad, use hot air, it will release the glue easily.
You may be able to recover it with WinKFP first.
RE: need checksum Bosch m5.2.1 - torixon91 - 12-10-2018
it's without boot mode flash.
It's looking like MS42 ECU or EDC15C4.
I tried with hot air, and it released with bigger pressure
I have to find the tool for checksum