+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59)
+---- Thread: Solved ✔ Corsa D new blank ECU (/showthread.php?tid=41136)
Corsa D new blank ECU - miriaga4344 - 21-10-2018
Hi everyone
I have problem with Corsa 09 1.3 brand new ECU, never program from vauxhall,
when trying to full scan with tech2, engine show on the list, but when I tried to go to engine section to programming show unknown ECU, and I couldn't go through to conect with module, I try from BCM, but still when I choice ECM new install programming stop unsuccessful and say engine already programmed.
I done many of them second hand without any issue
enyone program blank, brand new ECU, or have any idea what I need to do?
Thanks
RE: Corsa D new blank ECU - fraserauto - 21-10-2018
You need Tis2000 or Tis2 web select SPS Tech2 communicate new ECU then open Tis2000 will say service ECU follow promps write VIN ETC download to Tech2 then to car
RE: Corsa D new blank ECU - miriaga4344 - 22-10-2018
Thanks for the answer
So after downloading back to tech2 go back to finish SPS again and then I should have access to ECU to be programmed immo?
RE: Corsa D new blank ECU - fraserauto - 22-10-2018
[quote="miriaga4344" pid='383183' dateline='1540200150']
Thanks for the answer
So after downloading back to tech2 go back to finish SPS again and then I should have access to ECU to be programmed immo?
After SPS go in Immo and Program ( replace ECU ) need 4 pin security code
RE: Corsa D new blank ECU - miriaga4344 - 28-10-2018
Hi
Thanks again fraserauto
everything went without any problems,
software update and immo reprogramming