+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Odometer correction peugeot 307 2002 (/showthread.php?tid=41710)
RE: Odometer correction peugeot 307 2002 - volavka - 19-11-2018
@km666 With upa no need desolder or lift pin
@Nsp Try with this Pinout .. should read without problem
RE: Odometer correction peugeot 307 2002 - darek_naprawa - 19-11-2018
Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.
RE: Odometer correction peugeot 307 2002 - Nsp - 19-11-2018
Volavka i will try thanks
Darek does this method work? Does the odometer have to turn on?
RE: Odometer correction peugeot 307 2002 - km666 - 20-11-2018
BSI with 912 MCU i never write dash.Only with 95160 + Nec mcu must write dash.
(19-11-2018, 21:19 PM)Nsp Wrote: Volavka i will try thanks
Darek does this method work? Does the odometer have to turn on?
RE: Odometer correction peugeot 307 2002 - atomantmk - 29-05-2019
(19-11-2018, 21:12 PM)darek_naprawa Wrote: Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.
I have removed BSI, change KM and after that connect dash and put the key in the ignition coil but after connecting BSI on the dash was the same KM value, what I'm doing wrong?
What mean just power the dash because on dash was no lights?
RE: Odometer correction peugeot 307 2002 - jomberykaso - 29-05-2019
Mate, that procedure is only for bsi 95160 version, and that sometimes works...here I post for you the correct pinout for nec dash.
RE: Odometer correction peugeot 307 2002 - atomantmk - 29-05-2019
Dash is Sagem and not nec.
RE: Odometer correction peugeot 307 2002 - jomberykaso - 29-05-2019
are you sure mileage is not in sagem nec upd?.......lol
RE: Odometer correction peugeot 307 2002 - volavka - 29-05-2019
(29-05-2019, 20:32 PM)atomantmk Wrote: Dash is Sagem and not nec.
Dash brand should be sagem but mcu is Nec
Cheers .!
.
RE: Odometer correction peugeot 307 2002 - atomantmk - 29-05-2019
Yes, I have found that mcu is Nec uPD78 but I have Orange 5 and R270 and for this job I need UPA.