+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: PROBLEM ABRITES CONNECTION TO FIAT ECU (/showthread.php?tid=4181)
PROBLEM ABRITES CONNECTION TO FIAT ECU - aerosmith - 16-05-2014
Hello, i have an abrites commander. When i try to connect with fiat ecu, the software tell me "target unit does no respond". Do you know why?
I need an adapter to connect with ecu?
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU - mattydr67 - 16-05-2014
AVDI do not use any adaptor for FIAT cars
Do you have a genuine AVDI?
If yes did you activated by internet?
Conatact your dealer if you have any issues
Good luck
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU - aerosmith - 16-05-2014
Yes i have a genuine AVDI. The interface cannot connect to ECU neither in diagnosis. I need to do any settings to perform a connection with Ecu or others module?
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU - mattydr67 - 16-05-2014
Yes
Lantency must be set at 1 and change the com port from the one that it is installed automatically to other com port ( example: if the tool it is installed automatically when you install the drivers on com3 then change it on com5 and change the latency from 16 to 1 )
With interface plugged to the USB and internet connection turned on start the VW commander and in this time the software will be activated
Then if your OS hasn;t any issues and it is upgraded you have to have no problem to connect to a car
Good luck
PROBLEM ABRITES CONNECTION TO FIAT ECU - totalkey - 21-05-2014
Maybe this is not supported ecu
iPhone Tapatalk
RE: PROBLEM ABRITES CONNECTION TO FIAT ECU - aerosmith - 22-05-2014
It's impossible, it's an EDC16 ECU, that is supported in the Fiat ECU Abrites package.