CarTechnoloGY
*Need FULL BDM* Mpps v16 Checksum help Bravo EDC16C39 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: *Need FULL BDM* Mpps v16 Checksum help Bravo EDC16C39 (/showthread.php?tid=42125)

Pages: 1 2


*Need FULL BDM* Mpps v16 Checksum help Bravo EDC16C39 - Dolcevita - 11-11-2018

   

Hi all got problem 
Writing with Mpps v16
Writing goes to 100 percent but checksum calc. Giving error see picture 
Car don’t start anymore ... 

Tried mpps 16 with load and without 
Kess i get generic error ... 

Any idea how I can get I solved bdm not possible



-----
Edit 27 Nov need full BDM 

HW: 0281017808
SW: 1037516208
VIN nr.: 
SW ver.: 
Spare: 51902999
Engine: 
HW Ver.: 
SW upg.: 
Installation: 
 can some one help ?


RE: Mpps v16 Checksum help Bravo EDC16C39 - rs@chip - 11-11-2018

(11-11-2018, 18:18 PM)Dolcevita Wrote:  Hi all got problem 
Writing with Mpps v16
Writing goes to 100 percent but checksum calc. Giving error see picture 
Car don’t start anymore ... 

Tried mpps 16 with load and without 
Kess i get generic error ... 

Any idea how I can get I solved bdm not possible

you shouldnt take ignition off after writing and straight write ori back..now you can try chose ecu and yust write ori file without id it first..else I dont no what to tell u bdm is only way


RE: Mpps v16 Checksum help Bravo EDC16C39 - Dolcevita - 11-11-2018

U mean with mpps or kess ?

with Mpps I get id all fine but writing after 100% it try to clac checksum and error


RE: Mpps v16 Checksum help Bravo EDC16C39 - benii75 - 11-11-2018

mpps calculate self crc but you bricked ecu neede now to recovery with bdm


RE: Mpps v16 Checksum help Bravo EDC16C39 - Dolcevita - 13-11-2018

no way to read bdm with ktag 7,020 or 6,070
any idea why ?


RE: Mpps v16 Checksum help Bravo EDC16C39 - Dinho - 14-11-2018

if cant read MPC by BDM, i think its dead. 2 years ago i killed Alfa edc16 with wrong bdm pinout.


RE: Mpps v16 Checksum help Bravo EDC16C39 - Dolcevita - 14-11-2018

mpps still conecting an i get id and can flash with it but
it writes until 100% and zack see picture first post biggrin


i tried old dimsport transdata and it says :
error E000020 Unidentified Microcontroller


RE: Mpps v16 Checksum help Bravo EDC16C39 - levis - 14-11-2018

Even with original file you get the same error ?


RE: Mpps v16 Checksum help Bravo EDC16C39 - rs@chip - 14-11-2018

(14-11-2018, 08:57 AM)levis Wrote:  Even with original file you get the same error ?

+1 same question ... If your original file courupted try find original file from same ecu(immo off it) and write..you have nothing to lose..I cant see the reson this happening to you I write this ecu by obd numerus times,iven with mpps


RE: Mpps v16 Checksum help Bravo EDC16C39 - donesko - 14-11-2018

what did you excpect from $10 tool ?