+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59)
+---- Thread: Programming Astra J BCM (/showthread.php?tid=42539)
Programming Astra J BCM - Burt_100 - 19-11-2018
I need to program an Astra J BCM and my Vauxcom wont do it, I was going to get a clone mdi but it appears that I would still need an online account with security access, Is there a way around this or do I need to take it back to vauxhall?
RE: Programming Astra J BCM - Wibo - 20-11-2018
mdi clone with online account works great...
But you have to pay for it but its not sooo expensive
RE: Programming Astra J BCM - Burt_100 - 20-11-2018
Can I use a clone with an online account? Is there a specific model of clone I need? Does it take long to setup an online account?
RE: Programming Astra J BCM - Wibo - 20-11-2018
yes there is no Problem.
But...
Maybe yout don´t need Online account Till end of 2011 you can Use Global Tis V32
RE: Programming Astra J BCM - Andrnet - 20-11-2018
15 eur registration.
SPS Vehicle Programming (Basic) 2 Hour(s) 35,00 EUR
RE: Programming Astra J BCM - Burt_100 - 21-11-2018
Is there a specific clone I should get or are they all the same?
I have been looking at this one, Can anyone tell me if this one is any good?
http://m.eobdtool.com/high-quality-wifi-gm-mdi-tech3-tech-3-multiple-diagnostic-interface-p-1514.html?type=1