+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Need help VAG immo4 (/showthread.php?tid=42811)
Need help VAG immo4 - eautocheck - 25-11-2018
I am having a nightmare problem with a 2010 Jetta 2.5 with a magnetti marelli cluster with motorola processor and I am hoping one of the experts here will be kind enough to point me in the right direction. Car came in with 1 working key. Added a second key no problem. Started the car with both keys no problem. After programming keys the cluster reset and then display now says safe mode/no key. Somehow I am afraid that the immo data was corrupted because now when you read immo data the serial number is blank and the spot where is shows cs1 and cs2 data are all zeros. Had a locksmith come look at it and he says it needs coding. I paid another member of this forum to do that and he had problems as well. Any advice or help would be great. The avdi is original in case anyone is going to ask. Thanks in advance.
RE: Need help VAG immo4 - raffy haddad - 26-11-2018
Hello didn't you save the original eeprpm data ?
Put them back to cluster and check
Regards