CarTechnoloGY
BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image (/showthread.php?tid=4290)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Bimmeristi - 24-05-2014

Who can share isid mac changer?

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 24-05-2014

(24-05-2014, 18:39 PM)Bimmeristi Wrote:  
(24-05-2014, 18:30 PM)beemerboy88 Wrote:  
(24-05-2014, 16:53 PM)Bimmeristi Wrote:  ISID is english(changed with spanner icon), but ISTA/P is russian language. How to change to english?

ISTA/P spanner icon can't do nothing about settings.

i see in your screenshot that the network is still configuring (red writing). if that stays on all the time then you have a problem. I think you need to set up the isid mac address. WSM icon will then be active and language settings should get saved properly.

What MAC address needs and howto? I don't have ICOM interface yet...

ISID mac address needs to match the mac address of your Ethernet adaptor.

1. Open a command prompt, type in ipconfig/all and write down the mac address of your Ethernet adaptor.

2. Now change the ISID mac address in the following files, to match the one from step 1 (using notepad or xml editor):

p:\apps\wsm\apps\agent\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\PXEBootDevices.xml

3. Reboot your computer.

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Bimmeristi - 24-05-2014

(24-05-2014, 21:16 PM)beemerboy88 Wrote:  
(24-05-2014, 18:39 PM)Bimmeristi Wrote:  
(24-05-2014, 18:30 PM)beemerboy88 Wrote:  
(24-05-2014, 16:53 PM)Bimmeristi Wrote:  ISID is english(changed with spanner icon), but ISTA/P is russian language. How to change to english?

ISTA/P spanner icon can't do nothing about settings.

i see in your screenshot that the network is still configuring (red writing). if that stays on all the time then you have a problem. I think you need to set up the isid mac address. WSM icon will then be active and language settings should get saved properly.

What MAC address needs and howto? I don't have ICOM interface yet...

ISID mac address needs to match the mac address of your Ethernet adaptor.

1. Open a command prompt, type in ipconfig/all and write down the mac address of your Ethernet adaptor.

2. Now change the ISID mac address in the following files, to match the one from step 1 (using notepad or xml editor):

p:\apps\wsm\apps\agent\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\PXEBootDevices.xml

3. Reboot your computer.

I done this. Nothing new show up, ISTA/P is still russian language. Or what i should look?

Is there any other who has installed this and is yours ok, languages not russian etc?!??

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 24-05-2014

[/quote]

I done this. Nothing new show up, ISTA/P is still russian language. Or what i should look?

[/quote]

Did you wait until network finished configuring and WSM became active? may take a few minutes. Do not start ISTA/P until network has configured.

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Bimmeristi - 24-05-2014


I done this. Nothing new show up, ISTA/P is still russian language. Or what i should look?

[/quote]

Did you wait until network finished configuring and WSM became active? may take a few minutes. Do not start ISTA/P until network has configured.
[/quote]

Voila!! English languages all around and expert mode ^^

Now just waiting ICOM interface?

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - ATC - 25-05-2014

Hi !!
Expert mode active?

Thanks
BS

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Bimmeristi - 25-05-2014

(24-05-2014, 21:16 PM)beemerboy88 Wrote:  
(24-05-2014, 18:39 PM)Bimmeristi Wrote:  
(24-05-2014, 18:30 PM)beemerboy88 Wrote:  
(24-05-2014, 16:53 PM)Bimmeristi Wrote:  ISID is english(changed with spanner icon), but ISTA/P is russian language. How to change to english?

ISTA/P spanner icon can't do nothing about settings.

i see in your screenshot that the network is still configuring (red writing). if that stays on all the time then you have a problem. I think you need to set up the isid mac address. WSM icon will then be active and language settings should get saved properly.

What MAC address needs and howto? I don't have ICOM interface yet...

ISID mac address needs to match the mac address of your Ethernet adaptor.

1. Open a command prompt, type in ipconfig/all and write down the mac address of your Ethernet adaptor.

2. Now change the ISID mac address in the following files, to match the one from step 1 (using notepad or xml editor):

p:\apps\wsm\apps\agent\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\PXEBootDevices.xml

3. Reboot your computer.

Sorry, deleted.

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - mexanico1971 - 26-05-2014

Bimmeristi !
can you save acronis image of you dell ,for people here ?!
many thank"s

BR

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Bimmeristi - 26-05-2014

(26-05-2014, 02:17 AM)mexanico1971 Wrote:  Bimmeristi !
can you save acronis image of you dell ,for people here ?!
many thank"s

BR

Yes, i installed it to dell and seems to work well with expert mode. Not tested with ICOM yet.

RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 26-05-2014

(22-05-2014, 10:46 AM)joecosta Wrote:  Hello, as anyone installed on Lenovo X61? Thanks

I've installed it on a X200 and it works fine so you shouldn't have any problems installing it on a X61.

Note:

ISTA/P only works with ICOM A clone. If you want to use it with ICOM A2 clone or OEM, you will have to register them manually by modifying the relevant XML files.