+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image (/showthread.php?tid=4290)
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Dren1977 - 30-05-2014
(30-05-2014, 00:01 AM)Bimmeristi Wrote: What firmware for ICOM A2 need to use with this? Or just use latest .45?
Best to always use the latest firmware available
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - ahmedmph - 30-05-2014
Please guide me how to let it work with ICOM A2?
what xml files needs to be modified
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 31-05-2014
(30-05-2014, 18:12 PM)ahmedmph Wrote: Please guide me how to let it work with ICOM A2?
what xml files needs to be modified
Attached are some ICOM A2 (clone) xml files I've made for this image. Follow the instructions in the zip file.
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - maarhyna - 01-06-2014
And for icom original ?
thanks
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 01-06-2014
(01-06-2014, 09:01 AM)maarhyna Wrote: And for icom original ?
thanks
you will have to make your own because the serial numbers, ip address etc. are different for each oem icom.
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - mipe - 01-06-2014
Has anyone tried to use the ISTA-P with F-series? I have Icom A2 clone. I tried program F07 and in the beginning I get the following error message:
[Link] ISTA-P error on F-series [/Link]
Does disk image contains programming data for the F-series?
If not when I download a whole package PsdZdata how do I install on this disk correctly?
Thank you for your advice. The E-Series works well.
Thank you for this disk image
MiPe
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - Mooney Driver - 01-06-2014
(29-05-2014, 19:40 PM)beemerboy88 Wrote: Ignore Microsoft loopback lan and wifi lan connections.
Your laptop ethernet adaptor is the one that needs to be named Eth0.
then you need to change the ISID mac address to match the mac address of your Ethernet adaptor. Use this procedure:
1. Open a command prompt, type in ipconfig/all and write down the mac address of your Ethernet adaptor.
2. Now change the ISID mac address in the following files, to match the one from step 1 (using notepad or xml editor):
p:\apps\wsm\apps\agent\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\DeviceInventory-ISIDR20000032.xml
p:\apps\wsm\apps\manager\data\PXEBootDevices.xml
3. Reboot your computer and after a few minutes ISTA should load up ok (red writing may take a couple of minutes to clear)
I've got it working following these instructions, but it disables my wireless connection whenever WSM starts. I've tried messing with the <internal interface> section to point it to the loopback adapter, but then I'm back to the red "configuring network" text. I tried deleting the<internal interface> through </internal interface> section, but it was automatically added again the next time WSM launched. Is there any way to keep a working wireless connection with this image?
Thanks
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - beemerboy88 - 01-06-2014
[/quote]
I've got it working following these instructions, but it disables my wireless connection whenever WSM starts. I've tried messing with the <internal interface> section to point it to the loopback adapter, but then I'm back to the red "configuring network" text. I tried deleting the<internal interface> through </internal interface> section, but it was automatically added again the next time WSM launched. Is there any way to keep a working wireless connection with this image?
Thanks
[/quote]
You need to rename your wifi adaptor. Example: change it from "WLan0" to "MyWifi". It should then work ok.
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - 530d - 02-06-2014
Why do you have a Windows XP 64 bit? This image is a Windows XP 32bit
(28-05-2014, 12:09 PM)IZGOY Wrote: For this build does not work expert mode!
themselves correct file - ISTA-P\Taurus\Common\cfg\KronosSettingsMapping.xml
serach for word SERVICE-change it to EXPERT!!!!
Now that's something to work on ....
http://gyazo.com/0abd986cb2b67ad1c271e13f39e8cb38
http://gyazo.com/78ab1ee6056073e12084f2913ff4d381
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image - IZGOY - 02-06-2014
Http://gyazo.com/c0d23e05f87dc7d255d6ae3aa28bd315
I have W7 32-64 bit ........
http://gyazo.com/7dae9bcc6f8c8140e97b591f49db896d
http://gyazo.com/33c4704cd0f6568048b9d34fd10af67d
http://gyazo.com/5e4d6ce6aa73c4f7596a637a486af252