+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Ride height sensor - disable (/showthread.php?tid=42969)
Ride height sensor - disable - carat10_2 - 29-11-2018
Hi
I have mini F56 with BDC, need disable ride height sensor, but coding from fem not work.
Try disable more options LWR_AHL_TYP = ohne, C_FLC_ENA = disable, still in diagnostic have error that calibration it sensor.
RE: Ride height sensor - disable - maksymw - 29-11-2018
You must change yet:
LWR_ENABLE_TMS to LWR_aus
LWR_ENABLE to nicht_aktiv
LWR_TREIBER_ERR_TMS to nicht_aktiv
RE: Ride height sensor - disable - carat10_2 - 29-11-2018
I change to your coding, but still error: Ride height sensors: values impausible
RE: Ride height sensor - disable - Fatalix - 29-11-2018
Tried unplugging sensors as you are removing the function of them?
RE: Ride height sensor - disable - maksymw - 30-11-2018
But these errors are in the BDC or in the ICM? It seems to me that you have errors in the ICM.
RE: Ride height sensor - disable - grec0 - 15-07-2019
@carat10_2 You managed to disable them?
RE: Ride height sensor - disable - mcrussell - 19-01-2022
Hi,
Did anyone manage to get around this?
I have the same issue, C_FLC_ENA is set to not active but I get the implaubible error in the BDC.
2019 F55
RE: Ride height sensor - disable - Djkalash - 22-12-2023
Hi , did somebody solve this problem?
RE: Ride height sensor - disable - Mwahab - 22-12-2023
MLC_ Aktiv
LWR_Enable Aktiv
FLC_ENA Nicht aktiv
LWR_AHL_ Manuel
and there is one more specific for Mini cooper i dont remember it
if u want to know it, compare values with and without 5A2/5A4
RE: Ride height sensor - disable - maksymw - 22-12-2023
Gentlemen, in extreme cases it is not enough to change the values you provide. The most important thing is to change the value FLC_ENA change to nicht_aktiv. If there is no effect, also change the value:
TYP_HSS - change to KEINE
SOURCE_HSS - change to KEINE
The rest related to value LWR does not matter much and we only lose top-down light testing when starting the car.