+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: w212 vgs4nag2 coding with avdi mn027 (/showthread.php?tid=43165)
w212 vgs4nag2 coding with avdi mn027 - rinaprasant - 03-12-2018
Hello
i have mercedes w212 transmission vgs4nag2 coding
i try with avdi new mn027 funcation but in funcation no options fbs4 renew
so it will appear on only table with 120 ohms resistor
i try ecu renew fbs4 all success but car not cranck now
i want to know avdi where the funcationd or how to personalized
thanks
RE: w212 vgs4nag2 coding with avdi mn027 - Shreyash786 - 03-12-2018
Even i tried no success
RE: w212 vgs4nag2 coding with avdi mn027 - pepi - 04-12-2018
Send the LOG file to the ABRITES and contact them for your problem. They say this function works with MN027.
RE: w212 vgs4nag2 coding with avdi mn027 - avtokeysoft - 04-12-2018
no use they did some thing to vrigin the module but after that there is no tool who can adapt it, even star diagnostic,
this AVDI function is no use until they find solution for adapt the vgs or fbs4,crd3 too
RE: w212 vgs4nag2 coding with avdi mn027 - rinaprasant - 04-12-2018
thanks
so my car not start no way
thanks
RE: w212 vgs4nag2 coding with avdi mn027 - avtokeysoft - 04-12-2018
your car will start you need start xentry online to adapt the ecu, as your ecu is belonging to this car you just virgin it,
but i was said that if some one want to virgin ecu from one car and want to adapt it to other car its not possible at the moment, i hope AVDI find adaptation solution for this problem,
other wise no use only to virgin the ecu and then you are not able to adapt it with any tool.
RE: w212 vgs4nag2 coding with avdi mn027 - rinaprasant - 09-12-2018
Hello
i have back up for fbs4 crd3 & after dead i have again read ecu file
i send both file if anyone have check or observation
name vgs4nga2 but is ecu file
thanks