Ford 2009 escape 2.5L 4 cylinder PCM problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Ford 2009 escape 2.5L 4 cylinder PCM problem (/showthread.php?tid=4356) |
Ford 2009 escape 2.5L 4 cylinder PCM problem - atak - 27-05-2014 Ford 2009 escape 2.5L 4 cylinder PCM problem Ignition coil number 1 and 3 negative signal no control Ignition coil driver chip location Who knows? See attached picture Thanks RE: Ford 2009 escape 2.5L 4 cylinder PCM problem - mrriadh - 27-05-2014 Hey mate i found those pics hope it helps you to find what are you looking for RE: Ford 2009 escape 2.5L 4 cylinder PCM problem - atak - 30-05-2014 Hello Friend I Ford Service Infomation (repair manual) in the Check This is PCM PCB board in Ignition coil driver chip problem Ignition coil driver chip Replacing the Problem resolve But I do not know Ignition coil driver chip location RE: Ford 2009 escape 2.5L 4 cylinder PCM problem - Buihuyduc - 02-06-2014 In here, the Escape 2009 is 2.3l 4 cylinder . I have fit one last time . You can measure ohm from negative ignition coil to each transistor . I remember that it is a small transistor . |