+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Fiat - Alfa Romeo (https://cartechnology.co.uk/forumdisplay.php?fid=82)
+---- Thread: Fiat MultiEcuScan 4.2 (/showthread.php?tid=43800)
Pages:
1
2
Fiat MultiEcuScan 4.2 - Twoone - 15-12-2018
Link Deleted post closed.
RE: Fiat MultiEcuScan 4.2 - tempestas - 17-12-2018
Works perfectly.
RE: Fiat MultiEcuScan 4.2 - Guibb - 21-12-2018
Friends, I try use MES 4.2 but not connect. Only proxi alignment is functional. Is it ok?
RE: Fiat MultiEcuScan 4.2 - Commander - 22-12-2018
Hi
I have problem
When I try run the b- mes42 it just flash on screen and gone
I was trying run on different compatible but the same
My win 7 prof 64 .
Bf I have ver. 3.6 without problem
Any ideas ??? Thanks
RE: Fiat MultiEcuScan 4.2 - mattydr67 - 22-12-2018
For 50€/year are spending your time?
For one its working as they said and for the other don't. We don't know if its about the crack itself or peaple don't follow the correct steps.
Anyway I don't mind with this.
Good luck
RE: Fiat MultiEcuScan 4.2 - adamistr0 - 22-12-2018
It's not 50€/year, it's 50€ for updates for a year and then you can keep your license forever. But I don't buy any software that's more than 10€...
RE: Fiat MultiEcuScan 4.2 - Commander - 23-12-2018
(22-12-2018, 14:27 PM)mattydr67 Wrote: For 50€/year are spending your time?
For one its working as they said and for the other don't. We don't know if its about the crack itself or peaple don't follow the correct steps.
Anyway I don't mind with this.
Good luck
This is a your answer to my question ????
You are a genius !!!
or u just try be active on the forum ?
Enemy .. thank you for your ,,5 penny,,
RE: Fiat MultiEcuScan 4.2 - kollegah - 25-12-2018
Hello,
is not working,
patch and reg is ok but an error comes.
Runtime error (see attched pic).
RE: Fiat MultiEcuScan 4.2 - adamistr0 - 25-12-2018
(25-12-2018, 10:18 AM)kollegah Wrote: Hello,
is not working,
patch and reg is ok but an error comes.
Runtime error (see attched pic).
You need to close "patch" window, so only MES is opened. I had this problem for weeks. This should be in readme
RE: Fiat MultiEcuScan 4.2 - Guibb - 26-12-2018
(25-12-2018, 12:46 PM)adamistr0 Wrote:(25-12-2018, 10:18 AM)kollegah Wrote: Hello,
is not working,
patch and reg is ok but an error comes.
Runtime error (see attched pic).
You need to close "patch" window, so only MES is opened. I had this problem for weeks. This should be in readme
Did it work with you? Not connecting here. With version 4.0 works perfect.