Mazda BT-50 error code - Printable Version

Mazda BT-50 error code - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69)
+---- Thread: Mazda BT-50 error code (/showthread.php?tid=4407)

Mazda BT-50 error code - coriducu - 30-05-2014

Hello guys bow

I have a Mazda-BT50,2.5D,2008 in garage,was need to change piston+rod+2valves+2cam followers and timing belt,after timing was broken.No any problem,but now wen I start engine I get a error code without much explanation give by Mazda IDS.(v88.05)
P1391-GPC Low Imput Bank 1 and nothing else whew

searching on internet I found that this code for Ford(same car as Ranger hope to be same for Mazda),is referring to preheating system,but before I fit glow plugs , I checked and all seems to be ok jealous

.I try to erase DTC but every time I start engine the check light is lighting and error is same.Can somebody advice me what mean that Low Imput Bank 1,and what should I check?Idea is that in my country this kind of car are rare and same spare parts cannot be found,just by OE.I not like to bring plugs,and problem to be in other side,putting client to pay for something is good shake

.It is not professional + not my intention angry

Please if someone can point me in right direction bow

Thanks in advance beer

RE: Mazda BT-50 error code - admiral - 30-05-2014

(30-05-2014, 13:49 PM)coriducu Wrote: Hello guys
I have a Mazda-BT50,2.5D,2008 in garage,was need to change piston+rod+2valves+2cam followers and timing belt,after timing was broken.No any problem,but now wen I start engine I get a error code without much explanation give by Mazda IDS.(v88.05)
P1391-GPC Low Imput Bank 1 and nothing else searching on internet I found that this code for Ford(same car as Ranger hope to be same for Mazda),is referring to preheating system,but before I fit glow plugs , I checked and all seems to be ok .I try to erase DTC but every time I start engine the check light is lighting and error is same.Can somebody advice me what mean that Low Imput Bank 1,and what should I check?Idea is that in my country this kind of car are rare and same spare parts cannot be found,just by OE.I not like to bring plugs,and problem to be in other side,putting client to pay for something is good .It is not professional + not my intention
Please if someone can point me in right direction
Thanks in advance

corriducu my friend,,, this cod is bug in the Glow plug command line ,,,,or is burned or short circuit in the earth drive

,Both DTCs P1391 and P1393 together will set when the monitor indicates that all eight glow plugs are not being powered. An open in all glow plug circuits, the glow plug relay, glow plugs, fusible links or all three monitoring circuits could be the possible causes.
Possible causes:

glow plug relay
glow plug shunt
open in glow plug circuit(s) or monitoring circuit(s)
glow plugs
PCM

RE: Mazda BT-50 error code - coriducu - 30-05-2014

Partially problem solved tongue

seems one of glow is in short,but main problem is that he burned glow plugs fuse,so till I will have new plugs I'll try to found this idiot fuse model fail

Thanks for help bow