+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Help Needed! Coding used EPS on my BMW E82 (/showthread.php?tid=44138)
Help Needed! Coding used EPS on my BMW E82 - spukhoo - 23-12-2018
Hello everybody!
My EPS,on my E82 (2008) got water damaged so i decided to swap it to a used one.I have installed the new (used) EPS but i still got the yellow steering icon on the instrument cluster and the steering is also stiff.
Can anyone help me out with the coding? I got a K+Dcan cable.
Thank you very much!
RE: Help Needed! Coding used EPS on my BMW E82 - oceandiver86 - 23-12-2018
Write the correct VIN with Tool32 and code the EPS with NCSexpert.
For this you need standart tools and Sp Data for your chassis.
RE: Help Needed! Coding used EPS on my BMW E82 - spukhoo - 23-12-2018
I tried to code it with ISTA P,but it wants me to enter manually the part number of the basic and the programmed control module.
RE: Help Needed! Coding used EPS on my BMW E82 - Qwerti - 24-12-2018
(23-12-2018, 21:01 PM)spukhoo Wrote: I tried to code it with ISTA P,but it wants me to enter manually the part number of the basic and the programmed control module.
The eps voltage supply/pt-can is good?
RE: Help Needed! Coding used EPS on my BMW E82 - spukhoo - 24-12-2018
(24-12-2018, 01:25 AM)Qwerti Wrote:(23-12-2018, 21:01 PM)spukhoo Wrote: I tried to code it with ISTA P,but it wants me to enter manually the part number of the basic and the programmed control module.
The eps voltage supply/pt-can is good?
Thank you for your reply! How could i check this?
In ISTA D i got this error message about my EPS.