+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: f10 universal xenon kit (/showthread.php?tid=44220)
f10 universal xenon kit - budddyyy - 26-12-2018
hello, a friend has buyed a xenon kit universal an plugged in in his f10 prefacelift
everything is ok when the car is off.
when the car is running de xenon light has flashes on/off on /off
so i have code the SA 522 for xenon the xenon light now is ok but the directions indicators in front has errors now.
the directions indikators is not LED
and the high beam dont work too.
so i think what we can do?
i have yesterday code the warm cold monitoring of the directions indicators but its still the same......
i have read that i must be remove the SA522 and that i must be code the Voltage for the light?
but i dont find anything about that in the internet. can anyone help me
thanks a lot
and sorra for my broken english
RE: f10 universal xenon kit - mr_nitroz - 26-12-2018
Code FRM back to original without 522. Save your coding options of FRM in fdl editor. Now do the same with 522 VO option. Compare both coding files with NCD viewer. Manually code parts related just to low beam bulbs or post here differences and we will tell you what have to be changed exactly.
RE: f10 universal xenon kit - budddyyy - 27-12-2018
ok cool, thansk for your help, my problem is, i can coding with esys a little bit but i dont know the programm very good.
have you maybe a little instruction how i can save the coding options in fdl editor.......
and when i have it correctly understand, i need the 2 savings of the frm with and withut the SA522
and i post them here and then the original file will be changed so i can write back to the car?
for this i need a little help too please how i can code the file to the car.
sorry but i have only vodes and changes FA other functions for esys a new for me
but i'm interessting to learn it
RE: f10 universal xenon kit - budddyyy - 28-12-2018
the problem has been solved, i had changed the coding in the frm to xenon light installed..... now its work
@mr_nitroz for my understand. you says i neet to save the coding options......
ma question is how i save the coding options in fdl editor?
when i code the frm it changes automaticly to fdl editor....... and then the data in C:\ esys...\...\...\.... *ncd is that the daa which u mean to be save? becaus in esys i dont have see a button to save the data manuell..
RE: f10 universal xenon kit - mr_nitroz - 29-12-2018
It is under file-save as in fdl editor. Leave file name pre-defined and fill just your own extension. For example: xxx.ncd_orig program to compare coding files is ncdcafdtool.