CarTechnoloGY
UPA HC912 / 78KO adapter " baudrate capture error" - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: UPA HC912 / 78KO adapter " baudrate capture error" (/showthread.php?tid=44289)



UPA HC912 / 78KO adapter " baudrate capture error" - mikroel - 27-12-2018

Repair solution for error "baud rate capture error"
UPA HC912 / 78KO adapter modification. For china adapters !

 pass on PM after thanks and rep


RE: UPA HC912 / 78KO adapter " baudrate capture error" - mikroel - 28-12-2018

there are two models  RED with 29C010 eprom and GREEN with 28c16 eprom

here is solution for GREEN


RE: UPA HC912 / 78KO adapter " baudrate capture error" - mikroel - 25-01-2019

for green version 
one more mistake was founded


RE: UPA HC912 / 78KO adapter " baudrate capture error" - m_toy - 15-05-2019

(25-01-2019, 16:56 PM)mikroel Wrote:  for green version 
one more mistake was founded

Dear all,

I you still have baudrate capture error, even after add all the wires and checking the board, check also the content of flash on 78K0 adapter. Mine was empty, which causes this fault.

Regards

Milan