ccc bench wake up - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ccc bench wake up (/showthread.php?tid=44382) Pages:
1
2
|
ccc bench wake up - zero9 - 29-12-2018 I have ccc+cid+con and usb>can interface. What exactly it has to receive to wake up and to stay active all these units? Only 0x130 with 100ms or some others as well? RE: ccc bench wake up - zero9 - 30-12-2018 Question - to get cid working, do i need some other modules? Because when units are starting i see backlight of CID turns on for 1sec and goes off. RE: ccc bench wake up - bigpipe - 05-01-2019 (30-12-2018, 11:43 AM)zero9 Wrote: Question - to get cid working, do i need some other modules?you need cas modulo and Key. try out with a E65 CAs, it has the key included RE: ccc bench wake up - ashrafpts - 11-01-2019 You can try this : id = 0x12F, len = 8, data = 8C 50 8A DD F4 5 30 6 each 100MS RE: ccc bench wake up - minimega - 12-01-2019 (11-01-2019, 17:52 PM)ashrafpts Wrote: You can try this : Hi ashrafpts, do you know also the message to wakeup CHAMP2? I used the one for NBT and this your for CIC, but no one seems able to wakeup my CHAMP2. Thanks RE: ccc bench wake up - ashrafpts - 15-01-2019 try to use the 2 messages ( 0x130 & 0x12F ) at same time , as i know one message is to wakeup the module and the other one is to keep it live ( not to go to sleep mode ) RE: ccc bench wake up - lustek - 06-02-2019 Hi, Do I need connect cid and con to work with CCC on bench? I connect power and CAN Bus, I close MOST ring. The only module that I can connect is gateway, rest show IFH-9 error. I thing CCC is reseting because I hear from time to time CD drive. But maybe I need to connect CID and Controler to work? RE: ccc bench wake up - Silva1337 - 06-02-2019 Hello i have normal bench without can emu and ccc wiring i too only can connect to gw, cant connect to another most modules where could be problem? RE: ccc bench wake up - lustek - 06-02-2019 How you connect power to ccc? I connect only: 12V - pin 15 Ground - pin 12. What aboute pin 14 from LM? It's only for illuminating? RE: ccc bench wake up - Silva1337 - 06-02-2019 Yes its ilumination, everythibg conected +- can and most, my icom adapter blinks that with most everythibg good |