+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Edc15 pinout (/showthread.php?tid=44502)
Edc15 pinout - Justgytis - 02-01-2019
Hi, anyone know edc15 pinout? For kess. Ecu are bosch 038906018p from vw passat 1997, 110hp, 1.9tdi. My friend had him car remapped, and second gear after 3k rpm car just cut itself out, him said fuel not comming to engine. And when it's cuts out very hard to start it, and when it starts blow blue smoke for few seconds and after that it's ok to drive. Anyone know how to sort it out? Thanks in advance
RE: Edc15 pinout - bersch8688 - 02-01-2019
1, 27 ground, 2, 28b+12, ignition 47, K line 45
Push Thanks Button when i help
RE: Edc15 pinout - darek_naprawa - 02-01-2019
PLCC32 no reads kess.only programmer PLCC32
RE: Edc15 pinout - junnnior - 02-01-2019
hi
in this computer only outlets if they are original 2x27c010 and insert new ones eg 29c010 29f010 making a map and programming
obd not working
RE: Edc15 pinout - loki954 - 02-01-2019
the tuner messed up the map for the pump votage
, only with external programmer can read it
RE: Edc15 pinout - Justgytis - 02-01-2019
(02-01-2019, 19:59 PM)junnnior Wrote: hi
in this computer only outlets if they are original 2x27c010 and insert new ones eg 29c010 29f010 making a map and programming
obd not working
my phone killing me, i have ch341a, i don't think this would be good to use it, any recommendations which programmer and program to use to extract file?
[quote="loki954" pid='407453' dateline='1546464107']
the tuner messed up the map for the pump votage
I was thinking it was bad fuel map
RE: Edc15 pinout - jorgemiguel4 - 03-01-2019
Hey, check fuel pickup in tank and fuel filter.
RE: Edc15 pinout - Justgytis - 07-01-2019
(03-01-2019, 21:20 PM)jorgemiguel4 Wrote: Hey, check fuel pickup in tank and fuel filter.
I think him checked already, couldn't find anything wrong. I gonna scan chip and upload it in here, maybe someone gonna find anything. Him said when it stall it was alot of air in fuel pipes.
Edit:
So i opened up ecu and it looks like chips are at27c010 70ju. Is it this chips are ok if i buy same ones? And i can't read, because my plcc32 adapter probably faulty, show that pin detect error.
RE: Edc15 pinout - jorgemiguel4 - 18-01-2019
(07-01-2019, 10:47 AM)Justgytis Wrote:(03-01-2019, 21:20 PM)jorgemiguel4 Wrote: Hey, check fuel pickup in tank and fuel filter.
I think him checked already, couldn't find anything wrong. I gonna scan chip and upload it in here, maybe someone gonna find anything. Him said when it stall it was alot of air in fuel pipes.
Edit:
So i opened up ecu and it looks like chips are at27c010 70ju. Is it this chips are ok if i buy same ones? And i can't read, because my plcc32 adapter probably faulty, show that pin detect error.
If there is air in the lines the problem is not the ECU. Happened something similar to a friend of mine caused by a clogged check valve in fuel pickup.
So I would insist in fuel feed problem, test everything carefully.
Those chips are ok, otherwise car would not even start.