RNS -E PLUS AUDI - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: RNS -E PLUS AUDI (/showthread.php?tid=44504) |
RNS -E PLUS AUDI - barto39 - 02-01-2019 Hi guys, someone will help me with the rns-e plus code or that eeprom should read I understand that it should read memory 29XL12DF but as I can read Thank you 8E0035192K FWLA652878 86112-60V330 RE: RNS -E PLUS AUDI - PopDog - 03-01-2019 192 Units are crackable ... Why not use the Unlock CD ? So you don't have to harm any of hardware or screws on the unit. See here: https://cartechnology.co.uk/showthread.php?tid=2318 (Download checked and is available on Mega) Download and extract Unlock CD Image Burn on normal CD-R with Freeware Programm IMGBurn (also possible on DVD-R with IMGBurn and converting on the fly) Reboot RNS-E with 10 Seconds hold buttons Radio and Setup When MMI Screen comes up open up the Display to reach CD/DVD Drive - when not rebooting, screen will not open on Pin Screen. Insert burned Software CD/DVD-R and close screen - it will start to update SW on RNS-E After Reboot you have again the Pin Screen but in lower area you now will find a Serial Number like AUBZ342A35425 --- the last 4 digits are your pin (e. g. in this example 5425) after inserting that pin rns-e opens up directly If you want, you can them downgrade again software with latest nav dvd, because in Diagnostic it show SW Ver 0700 - or X- so everyone can see that is cracked. Downgrade works over Diagnostic - Adaption Channel 97 set to 1 and insert nav dvd with firmware ... then it downgrades. After that check if channel 97 is again at 0. when not then set it to 0. RE: RNS -E PLUS AUDI - barto39 - 03-01-2019 (03-01-2019, 02:04 AM)PopDog Wrote: 192 Units are crackable ... Why not use the Unlock CD ? So you don't have to harm any of hardware or screws on the unit. Hi guys Thanks PopDog, record Unlock CD and work perfectly now I have software: x --- I just need to connect vcsd for firmware |