+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: 3.0 BMK Engine with ASB Software (/showthread.php?tid=44880)
3.0 BMK Engine with ASB Software - nordlicht89 - 11-01-2019
Has anyone ever tried to flash the ASB Software to the ECU for the BMK Engine?
In my A6 4F (2006) I have the BMK 3.0 TDI without DPF (4F0910402L)
and after the update from SW0010 to 0020 it seemes to have less Power.
A friend of mine told me that he just flashed the ASB Software to his BMK...
Is this really a good Idea or is it recommended to get a Stage 1 BMK flashfile?
RE: 3.0 BMK Engine with ASB Software - PopDog - 11-01-2019
Be careful, don't flash other engine software except your engine software. Audi just don't clone motors and give them another Engine Identifaction. There is definetly more than that. This is very very cheap tuning, and when it works, you will end up sooner or later with a damaged engine. To save something like 200$ you will risk your whole car engine.
There was a TSB about less power on BMK Engines not reaching highest speed, but there was also a change of the software index letter or number then. When you tell me which software is actual on the ecu, I can check for you if software from Technical Service Bulletin is already flashed
Maybe you only feel less power, or while flashing the driving profiles gone nuts. When you have VCDS, you can go into ECU 46 Comfort Module - 10- Adaptions and try to reset the Key Profiles - so it resets the driving profiles. Go to all 4 Keys, set the adaption channel to 0 on every key, save and remove key. Then wait for bus inactivity (e. g. leave car locked for about 15-30 Minutes alone)
When you want more power, get yourself a good tuning. Already done some bmk's which have up to 305PS measured with Insoric Real Power System.
RE: 3.0 BMK Engine with ASB Software - nordlicht89 - 12-01-2019
VCDS:
Adresse 01: Motorelektronik
Steuergerät-Teilenummer: 4F0 910 402 L
Bauteil und/oder Version: 3.0L V6TDI A000AG 0020
Codierung: 0011372
Betriebsnummer: WSC 02334
VCID: 2643409991E70A7A8F-8072
Erweiterte Identifikation
Seriennummer:
Identifikation: BPG-810
Revision: --H01---
Datum: 19.10.05
Prüfstandsnummer: 1883
Herstellernummer: 0243
Flash Status
Programmierungs Versuche: 2
Erfolgreiche Versuche: 2
Programmierungs Status: 00000000
Voraussetzungen: 00000000
Flash Tool Nummer: 00200 785 02334
Flash Datum: 04.01.19
Software
A 4.7.7
Sonstiges
Hardwarenummer: 4F0 907 401 B
WFS Challenge: 05 10 7C E5
Fahrzeug Informationen
Fahrzeug-Ident.-Nr.: WAUZZZ4F
VCDS Info:
VCID: 2643409991E70A7A8F-8072
Labeldatei: DRV\059-907-401-ASB.clb
Readiness: Skript nicht verfügbar
RE: 3.0 BMK Engine with ASB Software - PopDog - 13-01-2019
Ok you already have newest sw on it. TSB tells us last file is this:
; 3,0l V6TDI EU4 o.DPF RdW im A6 (C6)
4F0910401L ; 0010 ; 4F0910401L ; 4F0910401L__0020.sgo ; mit HW 4F0907401A
4F0910401L ; 0020 ; 4F0910401L ; 4F0910401L__0040.sgo ; mit HW 4F0907401A
4F0910401L ; 0040 ; 4F0910401A ; 4F0910401A__0010.sgo ; mit HW 4F0907401B
4F0910401A ; 0010 ; 4F0910401A ; 4F0910401A__0020.sgo ; mit HW 4F0907401B
4F0910401A ; 0020 ; 4F0910402F ; 4F0910402F__0030.sgo ; mit HW 4F0907401B
4F0910402F ; 0030 ; 4F0910402L ; 4F0910402L__0010.sgo ; mit HW 4F0907401B
4F0910402L ; 4F0910402L__0010.sgo