+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ZGW-01 Mid to ZGW2 for Retrofit NBT F10 (/showthread.php?tid=44937)
ZGW-01 Mid to ZGW2 for Retrofit NBT F10 - vipsha - 12-01-2019
Hi, BMW F10, production date 09.2010. I need to install NBT.
1. I purchased a NBT with a gyroscope (rev. <=HW07), because there is no gyroscope in ICM. Most likely, without a gyroscope in the nbt there would be an error DSC.
2. I leave the joystick 6pin. So the PDC button will work. You can hide the old joystick under the trim and put a new one from the NBT.
3. It is necessary to flash ZGW-01 Mid in ZGW2. ZGW-01 MID with MOST.
How to flash ZGW-01 mid? I can not get on the instructions. Do I need to edit any addresses?
RE: ZGW-01 Mid to ZGW2 for Retrofit NBT F10 - Powerlab - 24-01-2019
Hello,
Not a very good way to retrofit nbt. Metal ZGW can't handle manipulated ZGW2 flash very well. Most likely, you'll get flexray problems in the near future.
My suggestion is to buy a Plastic MOST equipped ZGW and flash it with manipulated ZGW2 TAL.
or
Buy a real ZGW2-4SK.
or
Carsystems Fxx NBT retrofit adapter and you don't need HW07, HW08, HW09, HW10 NBT also with that adapter.