[FIXED] FS Tool 2 Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: [FIXED] FS Tool 2 Problem (/showthread.php?tid=44953) |
[FIXED] FS Tool 2 Problem - derDeno - 12-01-2019 Hey guys, I retrofited the CIC into my 2007 e92 and flashed to C1A. I used the SWT PAther v2 to virginize the CIC certificates. I edited the FSCs that where provided with the patcher using FS Tool2 to my cars vin. I changed the vin of the cic to my cars vin. After uploading my custom fsc's to unlock everything. Now when i try to upload the fsc's the problem begins. for 17 and 9C it worked without any problem, but 1b, 19, 6f and 9b don't work. I get the error that the fsc certificate is rejected when i check the status and i get the error code 2090. Can anyone help me please? regrads EDIT: Fixed it by updating fs tool 2 and car server to the latest version i could find (2.20 / 19). Now everything works as it should like RE: FS Tool 2 Problem - codemybmw - 12-01-2019 What is the error when you try to write the cert? RE: FS Tool 2 Problem - derDeno - 13-01-2019 (12-01-2019, 20:42 PM)codemybmw Wrote: What is the error when you try to write the cert? no matter what i try always error 2090. only 17 and 9c gets accepted, but every other application nr. triggers 2090 - but only on the fsc cert and fsc code. sig cert gets accepted on every application nr. |