+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: How to install RS Monitor? (/showthread.php?tid=45004)
How to install RS Monitor? - Stewartps - 13-01-2019
So a few people I know own a Renault Clio sport, however don't have RS monitor enabled from factory. I know it's possible 100% to enable RS monitor however I'm wondering how. I know it'll only work on certain monitors that are compatible with being enabled.
What tools are needed? I understand you physically need to attach hardware to the monitor to enable.
Would like to know how to do this on Renault Clio MK3's and Clio MK4's and Megane 250's ideally
I tried searching on the forum but doesn't seem to be any topics on the subject
RE: How to install RS Monitor? - ohayyam - 15-01-2019
(13-01-2019, 21:15 PM)Stewartps Wrote: So a few people I know own a Renault Clio sport, however don't have RS monitor enabled from factory. I know it's possible 100% to enable RS monitor however I'm wondering how. I know it'll only work on certain monitors that are compatible with being enabled.
What tools are needed? I understand you physically need to attach hardware to the monitor to enable.
Would like to know how to do this on Renault Clio MK3's and Clio MK4's and Megane 250's ideally
I tried searching on the forum but doesn't seem to be any topics on the subject
What is your Rlink2 software version ? it should be at least Version 7 and then you can try with developer mode as shown on attached photo.
RE: How to install RS Monitor? - Stewartps - 15-01-2019
(15-01-2019, 19:13 PM)ohayyam Wrote:(13-01-2019, 21:15 PM)Stewartps Wrote: So a few people I know own a Renault Clio sport, however don't have RS monitor enabled from factory. I know it's possible 100% to enable RS monitor however I'm wondering how. I know it'll only work on certain monitors that are compatible with being enabled.
What tools are needed? I understand you physically need to attach hardware to the monitor to enable.
Would like to know how to do this on Renault Clio MK3's and Clio MK4's and Megane 250's ideally
I tried searching on the forum but doesn't seem to be any topics on the subject
What is your Rlink2 software version ? it should be at least Version 7 and then you can try with developer mode as shown on attached photo.
RLink 1 I have buddy, it's 100% possible just not sure how
RE: How to install RS Monitor? - maydayanthem - 16-01-2019
try this:
https://www.cliors-concept.com/rajout-du-rs-monitor-possible-ou-pas-t59517-450.html?sid=8f193d44f8f65e0759b52bd2b9b142b1
good luck
RE: How to install RS Monitor? - Stewartps - 18-01-2019
(16-01-2019, 22:51 PM)maydayanthem Wrote: try this:
https://www.cliors-concept.com/rajout-du-rs-monitor-possible-ou-pas-t59517-450.html?sid=8f193d44f8f65e0759b52bd2b9b142b1
good luck
That was one of my sources however nothing really clear in there that explains it unforuntely