Digiprog vag no connection problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Digiprog vag no connection problem (/showthread.php?tid=4502) Pages:
1
2
|
||||||||||
Digiprog vag no connection problem - Dash_Burner - 06-06-2014 Hi all When i try to connect digiprog to some Audi-seat-skoda-vw cars before 2008 i get no connection error. I think it is a broblem of my unit.Does anyone has the same problem? Any solution? I believe there is solution for that. My unit is 4.88 original yanhua RE: Digiprog vag no connection problem - teerak2uk - 06-06-2014 For example what year RE: Digiprog vag no connection problem - Dash_Burner - 06-06-2014 (06-06-2014, 19:15 PM)teerak2uk Wrote: For example what year i think almost all vag before 2008 RE: Digiprog vag no connection problem - rc.if - 06-06-2014 Q23-Q26 transistors burned down.The signal is on to the K-line? RE: Digiprog vag no connection problem - C(A)R - 06-06-2014 Do not you have a problem with the line k in digiprog? I know that there were problems with all this line and vehicles, which have the same lines, digiprog not connect. Strange, because vehicles in 2008 are on Can, not on the line K. Contact the seller if you have it under warranty, then you can fix it. RE: Digiprog vag no connection problem - Dash_Burner - 06-06-2014 Does anyone knows where is k-line in digiprog.Mabe if i change resistors capacitors or switches in digiprog will solve my problem RE: Digiprog vag no connection problem - rc.if - 07-06-2014 (06-06-2014, 20:53 PM)mpitsaxis Wrote: Does anyone knows where is k-line in digiprog.Mabe if i change resistors capacitors or switches in digiprog will solve my problem K-Line oscill.
|