+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Toyota Voxy Cluster problem (/showthread.php?tid=45094)
Toyota Voxy Cluster problem - Mrwizz - 15-01-2019
I have a 2013 Toyota Voxy Cluster with a S93A66 chip which i tried using Digi Prog to reverse the mileage from 97608 to 35813 which it was done successfully but after the entire cluster has frozen . Any advice please?
RE: Change miles ODO Correction Toyota Hilux - volavka - 15-01-2019
(15-01-2019, 11:31 AM)Mrwizz Wrote: I have a 2013 Toyota Voxy Cluster with a S93A66 chip which i tried using Digi Prog to reverse the mileage from 97608 to 35813 which it was done successfully but after the entire cluster has frozen . Any advice please?
Post eeprom dump here
RE: Change miles ODO Correction Toyota Hilux - Mrwizz - 15-01-2019
EEPROM dump file is there but I tried to connect my Digi Prog3 machine as also my X Tool Pad2 to my Laptop but for some reason it not connecting, the Laptop is running Windows 7. Any suggestion of how to connect any of these two machines to the Laptop so I can get off the Dump files ?
RE: Toyota Voxy Cluster problem - Mrwizz - 16-01-2019
Can someone help please !
The EEPROM dump file that is on both my Digi Prog3 machine as also my X Tool Pad2, I want to transfer files from both to my Laptop but there is no connectivity when any of the Devices is connected to the Computer. 
Computer is not detecting any of the Devices, the Laptop is running Windows 7. Any suggestion of how I can connect any of these two machines to the Laptop so I can transfer Dump files to and from them so I can fix this damaged Odometer ? 
RE: Toyota Voxy Cluster problem - Dr. Zoidberg - 16-01-2019
upload a picture of the reading that digiprog gives you through the eeprom option, I think you have a problem in your CS (ff / 00).
RE: Toyota Voxy Cluster problem - Mrwizz - 16-01-2019
(16-01-2019, 11:18 AM)DrZoidberg Wrote: upload a picture of the reading that digiprog gives you through the eeprom option, I think you have a problem in your CS (ff / 00).
I think all the values are incorrect as I may accidentally write a wrong file to it