+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ccc dead (/showthread.php?tid=45097)
ccc dead - zero9 - 16-01-2019
Got unit which was dead. MOST was dead and unit was drawing only 300mA.
I reprogrammed 29f400 and 24c64 and now most started. Unit now have complete black screen, cd spinning - cant eject and rebooting after ~30sec. Looping.
I dont have on hands to reprogram st10, could that be a problem? Or there is problem in hardware elsewhere?
RE: ccc dead - Spitfire555 - 16-01-2019
Nobody can say if it is in your case the ST10 or a hardware failure.
Nevertheless, the ST10 also contain flash data and so give it a try to restore them.
RE: ccc dead - Hoborg - 16-01-2019
If most started then it isn't ST10 problem.
RE: ccc dead - Batje - 16-01-2019
If MOST works, ST10 cannot be your problem.
Try flashing it with WINKFP or try recovery DVD.
RE: ccc dead - Neon10 - 16-01-2019
Does anyone have a manual repair of these navigations? in every HW version there is another problem.
RE: ccc dead - zero9 - 16-01-2019
(16-01-2019, 17:40 PM)Batje Wrote: or try recovery DVD.
It might be a dumb question. How to use a recovery disc, if there is already disc in the unit and eject doesnt work?
RE: ccc dead - Hoborg - 19-01-2019
(16-01-2019, 18:13 PM)Neon10 Wrote: Does anyone have a manual repair of these navigations? in every HW version there is another problem.I think anybody who repair this units have own experiences and own repair manual, different for any HW
...