strange problem with bench - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: strange problem with bench (/showthread.php?tid=45146) |
strange problem with bench - Silva1337 - 16-01-2019 Hello i have succesfully made bench setup for E series, and problem is that strangely DDE computer dissapeared from uif list , its from n47 engine it has worked before, few days ago without any problems i have succesfully updated sw through obd, checked dde with ktag everything is ok r/w without problem, al wires in place(pt can,+ -) ,wakeup working any advices? RE: strange problem with bench - BMWzone - 16-01-2019 your problem is Ktag... RE: strange problem with bench - Silva1337 - 17-01-2019 (16-01-2019, 22:39 PM)BMWzone Wrote: your problem is Ktag... What you mean ktag i just tested and thats it, if you mean update sw, i made it with winkpf Problem is that i used it about week without any problems RE: strange problem with bench - rs@chip - 17-01-2019 (17-01-2019, 00:03 AM)Silva1337 Wrote:(16-01-2019, 22:39 PM)BMWzone Wrote: your problem is Ktag... probably he thinks iven faulty ecu can be read out using boot mode by ktag...test your bench using other ecu will be fastest at least I would do it RE: strange problem with bench - Silva1337 - 17-01-2019 I understood, but it worked before , seems to be fastest solution RE: strange problem with bench - willisodhiambo - 17-01-2019 The fact that it worked before does not preclude possibility of a fault in the ECU. Checking with another ECU is the best option before you probe further. Everything that is faulty worked before you know |