CarTechnoloGY
BMW Cas3 files corrupted. Car wont start.Help! - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW Cas3 files corrupted. Car wont start.Help! (/showthread.php?tid=45258)

Pages: 1 2

BMW Cas3 files corrupted. Car wont start.Help! - aubriuss - 18-01-2019

Hi,

The car wont start. When I put key in the dash shows only red car on the lift and airbag light. The car wont unlock steering wheel and no ignition lights will come on. Tryied to reset elv and do synch with elv and dm but no luck.. Still the same and car wont start.

I think the files are corrupted.

Is there anyone who can help too fix that and restore the good working files from them or there is no repair for it and I need to look for something else.

Thank you all for your help.

RE: BMW Cas3 files corrupted. Car wont start.Help! - rs@chip - 19-01-2019

(18-01-2019, 22:48 PM)aubriuss Wrote:  Hi,

The car wont start. When I put key in the dash shows only red car on the lift and airbag light. The car wont unlock steering wheel and no ignition lights will come on. Tryied to reset elv and do synch with elv and dm but no luck.. Still the same and car wont start.

I think the files are corrupted.

Is there anyone who can help too fix that and restore the good working files from them or there is no repair for it and I need to look for something else.

Thank you all for your help.

your eeprom repaired  under for flash part use WinKfp or ISTA-P to reflash it

RE: BMW Cas3 files corrupted. Car wont start.Help! - aubriuss - 19-01-2019

Thanks for your help.

Any chance that you could lead me how to do it? Never done it with Winkfp or ista-p.

Cheers

RE: BMW Cas3 files corrupted. Car wont start.Help! - Twoone - 19-01-2019

The car won't start. This was initial problem ore dit you do something with CAS?

Do you have cranck and no start?

Is KL15 activated?

Any Faults in ISTA?

Do the car have comfort acces? If so try disconnect comfort acces module. There might be short in door handles.

RE: BMW Cas3 files corrupted. Car wont start.Help! - aubriuss - 19-01-2019

(19-01-2019, 10:40 AM)Twoone Wrote:  The car won't start. This was initial problem ore dit you do something with CAS?

Do you have cranck and no start?

Is KL15 activated?

Any Faults in ISTA?

Do the car have comfort acces? If so try disconnect comfort acces module. There might be short in door handles.

Hi,

The car wont start. When i put key it shows red car on the lift and wont do anything. Wont unlock steering wheel and wont put ignition on.

There was two faults when i went with inpa..cas a0aa and aoab i think.

Tried to sync with elv and dme but change.

Thanks
(19-01-2019, 00:01 AM)rs@chip Wrote:  
(18-01-2019, 22:48 PM)aubriuss Wrote:  Hi,

The car wont start. When I put key in the dash shows only red car on the lift and airbag light. The car wont unlock steering wheel and no ignition lights will come on. Tryied to reset elv and do synch with elv and dm but no luck.. Still the same and car wont start.

I think the files are corrupted.

Is there anyone who can help too fix that and restore the good working files from them or there is no repair for it and I need to look for something else.

Thank you all for your help.

your eeprom repaired  under for flash part use WinKfp or ISTA-P to reflash it

Thanks mate but this file does not change a lot.. Still nothing.. When I change f90 line to all FF and car will wake up but wont start and wont put ignition on or unlock steering wheel.

Thanks for your help.

RE: BMW Cas3 files corrupted. Car wont start.Help! - Impac - 19-01-2019

Try disconnecting battery over night than flash cas with winkfp or ista p, reset elv and sync cas/dme clear codes

RE: BMW Cas3 files corrupted. Car wont start.Help! - inspi1981 - 19-01-2019

Unplug IBS sensor and car will start again

RE: BMW Cas3 files corrupted. Car wont start.Help! - 16eddi67 - 20-01-2019

He have interner error in dump


Br eddy

RE: BMW Cas3 files corrupted. Car wont start.Help! - yuko - 20-01-2019

write this file

RE: BMW Cas3 files corrupted. Car wont start.Help! - arthur101 - 20-01-2019

its not corrupted. try this bro