Ford PCM PROGRAMMING. - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Ford PCM PROGRAMMING. (/showthread.php?tid=45622) |
Ford PCM PROGRAMMING. - Senario - 26-01-2019 Hi everyone I have a Ford ECO SPORT 2011 model, Its PCM is faulty, I found an Old Used PCM ,Its part number is different, how can i program this ecu, I have this FORD VCM OBD, but i lost its software. if i get the software for this cable will it do the job or do i need something else. please let me know. RE: Ford PCM PROGRAMMING. - rightpcb - 26-01-2019 No idea about your cable / interface, I know the official can do it no problem RE: Ford PCM PROGRAMMING. - IM6 - 26-01-2019 Software for Programming is IDS Ford or FJDS (pass-true) Your Cable does not support this Software It works only with VCM or VCM II Rotunda Soft you can buy online The last step in Programming is reset parameter (dealer account) RE: Ford PCM PROGRAMMING. - Senario - 26-01-2019 clone vcm2 can go online? RE: Ford PCM PROGRAMMING. - IM6 - 26-01-2019 Only work if you have S/N current (black list) Same like VCM I (youtube show how to change) RE: Ford PCM PROGRAMMING. - darek_naprawa - 26-01-2019 FORD VCM OBD will do it by obd. You need an Incode / Outcode calculator. RE: Ford PCM PROGRAMMING. - dougy - 27-01-2019 (26-01-2019, 16:25 PM)darek_naprawa Wrote: FORD VCM OBD will do it by obd.Hi; Does Focom work on vcm1/2 or a simple modified Elm327 which perfectly works on forscan and foccus ? Or any Passthru? Regards. RE: Ford PCM PROGRAMMING. - darek_naprawa - 27-01-2019 (27-01-2019, 12:14 PM)dougy Wrote:NO(26-01-2019, 16:25 PM)darek_naprawa Wrote: FORD VCM OBD will do it by obd.Hi; Does Focom work on vcm1/2 or a simple modified Elm327 which perfectly works on forscan and foccus ? RE: Ford PCM PROGRAMMING. - dougy - 27-01-2019 Thk u for response. Is your soft full? |