W211 mileage correction with carprog clone. Version 10.93 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: W211 mileage correction with carprog clone. Version 10.93 (/showthread.php?tid=45901) |
W211 mileage correction with carprog clone. Version 10.93 - RUBBER_UNDIES - 01-02-2019 Is it possible to change the mileage in a w211 2003 e270 with just carprog? Ive changed my clocks with second hand ones because my original clocks failed. I've now got dashes where the mileage should be. Thanks for reading. RE: W211 mileage correction with carprog clone. Version 10.93 - mikroel - 01-02-2019 (01-02-2019, 17:50 PM)RUBBER_UNDIES Wrote: Is it possible to change the mileage in a w211 2003 e270 with just carprog? yes if you have good Carprog . Chinease carprog usually can't do 24Cxx v10.93 is Chinease fake, it is actually just v4.01 RE: W211 mileage correction with carprog clone. Version 10.93 - RUBBER_UNDIES - 01-02-2019 (01-02-2019, 18:02 PM)mikroel Wrote:(01-02-2019, 17:50 PM)RUBBER_UNDIES Wrote: Is it possible to change the mileage in a w211 2003 e270 with just carprog? Thank you. Will I need to adjust mileage elsewhere on the car also? Is it possible through OBD? I've never used it before. Want as much informtion as possible before using it. THANKS AGAIN RE: W211 mileage correction with carprog clone. Version 10.93 - loki954 - 01-02-2019 you need to sinch/code the new dash to your car, that is why you have --------. RE: W211 mileage correction with carprog clone. Version 10.93 - RUBBER_UNDIES - 01-02-2019 (01-02-2019, 18:14 PM)loki954 Wrote: you need to sinch/code the new dash to your car, that is why you have --------. Thanks again. Can the carprog do this? And do I need a can blocker? I already have a can blocker. RE: W211 mileage correction with carprog clone. Version 10.93 - loki954 - 01-02-2019 car prog will not do it, you need xentry....abritus.... maybe somthing else will do the job RE: W211 mileage correction with carprog clone. Version 10.93 - RUBBER_UNDIES - 01-02-2019 (01-02-2019, 18:14 PM)loki954 Wrote: you need to sinch/code the new dash to your car, that is why you have --------. Thanks for the information. RE: W211 mileage correction with carprog clone. Version 10.93 - RUBBER_UNDIES - 01-02-2019 (01-02-2019, 18:24 PM)RUBBER_UNDIES Wrote:I've tried it on genuine star, but the difference in mileage between the 2 clocks was too great and wouldn't do it. And it was on the BM servers as well. I thought carprog might have been a back door option.(01-02-2019, 18:14 PM)loki954 Wrote: you need to sinch/code the new dash to your car, that is why you have --------. Thanks. RE: W211 mileage correction with carprog clone. Version 10.93 - kryspl - 05-02-2019 if u changing clocks pairing clocks witgh ezs can be done with vas5054 and das software (Ive done it couple of times already!) As far I renembre hav to read codes on clocks and ezs and just follow procedures to find problem - will be done step by step - easy like clearing errors! Dont need to change codding no scn... good luck to make a real mileage just remove can filter to synchronize and after that connect it again and change miles with carprog - just read eeprom as a 95640 if is written on it 24lc.... works great on sprinter w906 - on your one might be simillar |