Fried my amp. Need a photo of a good board - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Fried my amp. Need a photo of a good board (/showthread.php?tid=45904) |
Fried my amp. Need a photo of a good board - vilord - 01-02-2019 I have a 2012 Logic 7 Harman Becker amplifier, and I fried it by plugging in the CD Changer MOST harness, which has +12V and GND, whereas the amp MOST harness only has +12V. See photo, it appears that a single diode or resistor or something was cooked (really well cooked too, there was a small flame for a few seconds). I'd like to replace the burnt component, but I don't think Harman releases schematics for their boards. Does anyone have one of these amps on a shelf and wouldn't mind taking a photo of this section of the board so I can try to identify the part? Thanks! |