+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63)
+---- Thread: Blind Spot Assist (/showthread.php?tid=46266)
Blind Spot Assist - dmcconnell68 - 07-02-2019
Hi,
I want to retrofit blind spot assist onto a 2018 GLC 43, which didn't come with it for some reason. Does anyone know how to perform coding to enable the option? Can id be done with Vediamo or DTS Monaco?
Thanks,
David
RE: Blind Spot Assist - MOMOSAM - 08-02-2019
(07-02-2019, 23:16 PM)dmcconnell68 Wrote: Hi,
I want to retrofit blind spot assist onto a 2018 GLC 43, which didn't come with it for some reason. Does anyone know how to perform coding to enable the option? Can id be done with Vediamo or DTS Monaco?
Thanks,
David
EIS add code 234
RE: Blind Spot Assist - kvaklys - 11-02-2019
Į have problem on cls w218 į cant connect to sgr module and cant find module on the car, where exentry shows iš not there.i have on instruments clusters message that message iš mising from blind Spot assist dont understand whats going on.
RE: Blind Spot Assist - apexturbo - 12-02-2019
check fuses. I had the blind spot sensors not working on w205 - it had a fuse blown in the trunk, don't remember the number but i assume numbers will also differ between these models.
regards
RE: Blind Spot Assist - ACloneHasNoName - 03-06-2019
(08-02-2019, 01:05 AM)MOMOSAM Wrote:(07-02-2019, 23:16 PM)dmcconnell68 Wrote: Hi,
I want to retrofit blind spot assist onto a 2018 GLC 43, which didn't come with it for some reason. Does anyone know how to perform coding to enable the option? Can id be done with Vediamo or DTS Monaco?
Thanks,
David
EIS add code 234
Where in Vediamo should this be done?
RE: Blind Spot Assist - Reshi - 05-06-2019
Eis222 coding smrd use it
RE: Blind Spot Assist - ACloneHasNoName - 05-07-2019
(11-02-2019, 22:56 PM)kvaklys Wrote: Į have problem on cls w218 į cant connect to sgr module and cant find module on the car, where exentry shows iš not there.i have on instruments clusters message that message iš mising from blind Spot assist dont understand whats going on.
I have the same issue as you had, with my 2011 R172, with the blind spot, where Xentry is showing an error code that the message is missing, and I am unable to communicate with the rear sensors.
Did you figure it out in the end? What was the problem and how did you fix it?
Thanks in advance!