+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: 6WA Kombi R270+ (/showthread.php?tid=46448)
6WA Kombi R270+ - icecapuk10 - 11-02-2019
Hi, I am new to the forums. Could anyone recommend a test clip/adapter to read a 35160WT on a 2017 6WA Kombi that is compatible with a R270+ (without the need for de soldering the chip) ?
Thanks.
RE: 6WA Kombi R270+ - volavka - 11-02-2019
Read eeprom is not a problem .. but currently not possible to erase
RE: 6WA Kombi R270+ - icecapuk10 - 11-02-2019
(11-02-2019, 13:56 PM)volavka Wrote: Read eeprom is not a problem .. but currently not possible to erase
Hi and thank you for your reply, however post 14 on thread https://cartechnology.co.uk/showthread.php?tid=42031&page=2 advises that the VIN can be blanked using the R270. The OP states he connected with a test clip which is what I am after as I do not want to go down the de solder route. The 6WA Kombi has a lower mileage than what is currently on my car.
Thanks.
RE: 6WA Kombi R270+ - pietje001 - 12-02-2019
you can change data in the chip, but dont program mileage on this type.
technicaly you can connect a clip to the r270 adapter, but i strongly advice to desolder the eeprom. (it might not even work by clipping a clip on eeprom, but its not a good idea to try anyway. especially on this eeprom because you cannot replace original eeprom, it has chip-id)
RE: 6WA Kombi R270+ - rs@chip - 13-02-2019
I also see the case when someone erase fujitsu memory using clip on simular cluster...