Need Help Coding from US to ECE E46 M3 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Need Help Coding from US to ECE E46 M3 (/showthread.php?tid=46472) |
Need Help Coding from US to ECE E46 M3 - dezender - 11-02-2019 Hi there, i own a E46 M3 US Modell.Now i Need to convert it to ECE. Which Software and how can i doit? Software ISTAD+ and ISTAP installed and Runnung also i got a ICOM NEXT Interface but without MOST Connector. Maybe someone can point me to get it German Sorry but English isnt my native Language. RE: Need Help Coding from US to ECE E46 M3 - oceandiver86 - 11-02-2019 Hi, you would need NCSexpert change the FA type from US to ECE and to recode the car. To flash DME and SMG (as far as I remember software is different) you can use winkfp RE: Need Help Coding from US to ECE E46 M3 - emhtuning - 11-02-2019 depending on the M3 year , older model uses SA instead of FA . RE: Need Help Coding from US to ECE E46 M3 - Enabled - 11-02-2019 Just for your info, US E46 M3 uses a different type of fuel pump relay, and the fuel pump relay is on a different dme pin. To keep in mind if you flash to a different dme software version. |