How to change Battery to 100Ah to E60 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: How to change Battery to 100Ah to E60 (/showthread.php?tid=46495) Pages:
1
2
|
How to change Battery to 100Ah to E60 - luv2vexx - 12-02-2019 Hi I had to change my battery yesterday from a Genuine Battery 90Ah to A Bosch S019 100Ah. Now i registered the battery using Ista D but cant seem to change the 100Ah. Any help would be appreciated RE: How to change Battery to 100Ah to E60 - emhtuning - 12-02-2019 for E60 , you can change to normal ( non AGM ) 110Ah only . E B080 BATTERIE_80AH //80 Ah-Batterie E B090 BATTERIE_90AH //90 Ah-Batterie E B110 BATTERIE_110AH //110 Ah-Batterie E A090 BATT_AGM_90AH //90 Ah-AGM Batterie (SA536) E A080 BATT_AGM_80AH //80 Ah-AGM Batterie but you can stick to 90Ah configuration , not a big difference and your car will do just fine . if you want to change your battery configuration then you need to edit the FA with NCS , Ista D doesn't have this option. RE: How to change Battery to 100Ah to E60 - luv2vexx - 12-02-2019 (12-02-2019, 10:28 AM)emhtuning Wrote: for E60 , you can change to normal ( non AGM ) 110Ah only . Thank you. I have to reinstall inpa again as it only showing me MASK no CAS option to code. Carly gives me the option of registering as 95AH RE: How to change Battery to 100Ah to E60 - Node - 12-02-2019 There is no 95Ah on E60. Don't know about carly. I would stay at 90Ah to avoid situations when car thinks there is enough juice left in a battery when in reality there is not. RE: How to change Battery to 100Ah to E60 - luv2vexx - 12-02-2019 (12-02-2019, 10:57 AM)Node Wrote: There is no 95Ah on E60. Don't know about carly. I would stay at 90Ah to avoid situations when car thinks there is enough juice left in a battery when in reality there is not. Thanks mate, Yes you are right, i will leave it at 90Ah. My battery was never changed and only found out how old it was by looking at the terminal engraved with date. RE: How to change Battery to 100Ah to E60 - Matthew53 - 12-02-2019 There is also an option in ISTA-P to register the correct battery, if someone prefer that way. RE: How to change Battery to 100Ah to E60 - Node - 12-02-2019 Yes, but you still have the same choises. RE: How to change Battery to 100Ah to E60 - emhtuning - 12-02-2019 (12-02-2019, 12:57 PM)Matthew53 Wrote: There is also an option in ISTA-P to register the correct battery, if someone prefer that way. (12-02-2019, 13:50 PM)Node Wrote: Yes, but you still have the same choises. offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . NCS can change FA in 30 seconds , and code full car in 1 minute . RE: How to change Battery to 100Ah to E60 - jaki - 13-02-2019 (12-02-2019, 17:13 PM)emhtuning Wrote: offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . In ISTA/P, at least AOS version, You can disable all measures plan's and go directly to battery coding. Yes it still takes a "bit" more time than doing same with ncs... And with F-series, same story, but only doing same with ISTA next. I haven't figured out yet how to do it with esys. All the cars till today have been only new battery registering, which is peace of cake with Ista. RE: How to change Battery to 100Ah to E60 - emhtuning - 13-02-2019 (13-02-2019, 11:28 AM)jaki Wrote:(12-02-2019, 17:13 PM)emhtuning Wrote: offcourse not the same at all , ISTA-P will take 1 hour just to make battery configuration change , that is only if user have expert mode enable and disabled PROGRAM all ECU and enabled only CODE . Esys procedure is exactly same as NCS , in Esys FA editor can also be done in no time . |