+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Digiprog 3 w211 mileage correction. (/showthread.php?tid=46522)
Digiprog 3 w211 mileage correction. - RUBBER_UNDIES - 12-02-2019
Hello friends.
I'm looking to try digiprog 3 on my w211 2003 e270.
The clocks have been changed because of total failure.
The mileage difference between the 2 clocks is 50k
I have now got dashes where the miles should be.
Can digiprog 3 change the clocks mileage so it correlates with the rest of the car thus showing the mileage? And can it be done via obd?
Thanks in advance.
RE: Digiprog 3 w211 mileage correction. - raull00 - 12-02-2019
did you try ezs first?
RE: Digiprog 3 w211 mileage correction. - RUBBER_UNDIES - 12-02-2019
(12-02-2019, 19:31 PM)raull00 Wrote: did you try ezs first?
I haven't tried anything. I'm a noob on Mercedes .
Is ezs the car's system or the correction software?
Thanks
RE: Digiprog 3 w211 mileage correction. - sparky001 - 12-02-2019
Electronic Ignition switch. Mileage needs to be synchronized with cluster. Zero mileage on cluster (Or under 500km), sync EIS to Cluster, Drive Access Authority, Done
Cheers
RE: Digiprog 3 w211 mileage correction. - RUBBER_UNDIES - 12-02-2019
(12-02-2019, 20:36 PM)sparky001 Wrote: Electronic Ignition switch. Mileage needs to be synchronized with cluster. Zero mileage on cluster (Or under 500km), sync EIS to Cluster, Drive Access Authority, Done
Cheers
Thanks Matey.
So, if I reset the mileage to zero with digiprog 3, xentry can then synchronise the clocks to ezs and the rest of the modules?
I'm new to all this.
Thanks.
RE: Digiprog 3 w211 mileage correction. - sparky001 - 12-02-2019
Yes.
I can't remember exactly how. But yes. Zero cluster mileage, Disconnect cluster for a couple of minutes, then go through EIS personalization... I think