problem with bmw f10 rear camera coding - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: problem with bmw f10 rear camera coding (/showthread.php?tid=46572) Pages:
1
2
|
problem with bmw f10 rear camera coding - budddyyy - 13-02-2019 hey guys a friend of me buyed an f10 530d year 2010 and in this car the old user has retrofit a rear camera original bmw , all was wirkung perfekt . but yesterday we have chancen the driving wheel with paddels and i have coding 2tb for sport automatik i have asses 2tb to vo and code the car vo all ecus now the camera is not working. ok i have looked then and vo 3ag for rear camera is not in the car. then i have add 3ag and code all ecus but still camera not works . but the 3ag is inside the vo . what i can do now with this car ? rheingold dont shows error . RE: problem with bmw f10 rear camera coding - emhtuning - 13-02-2019 can you see TRSVC module in Rheingold ,, even if its not working but still will appear in the module tree if TRSVC module is a live RE: problem with bmw f10 rear camera coding - buzzy - 13-02-2019 (13-02-2019, 20:25 PM)budddyyy Wrote: hey guys a friend of me buyed an f10 530d year 2010 and in this car the old user has retrofit a rear camera original bmw , all was wirkung perfekt . but yesterday we have chancen the driving wheel with paddels and i have coding 2tb for sport automatik i have asses 2tb to vo and code the car vo all ecus You may also need to add rear (rear/front) PDC if not present.. RE: problem with bmw f10 rear camera coding - budddyyy - 13-02-2019 i must see tsrvc is there or not . what i should do when it shows in rheingold and what when ist dont shows ? and the car has rear and front pdc RE: problem with bmw f10 rear camera coding - DayvG - 13-02-2019 Does the car show the parking PDC graphic whilst parking the car? It could be that some coding has turned the cam/PDC macro off. You may need to find it within the NBT and enable the macro for cam/PDC. There are too many variables at the moment without knowing what you do and don’t have. RE: problem with bmw f10 rear camera coding - budddyyy - 13-02-2019 the cic navigation shows the parking pdc in big middle and small graphit in the right side ... where the camera must be show there is a big pdc graphic RE: problem with bmw f10 rear camera coding - inspi1981 - 13-02-2019 It's enabled in iDrive? RE: problem with bmw f10 rear camera coding - budddyyy - 13-02-2019 where we can see that ? on my car when i drive revearse then i can switch with push on the idrive button the cams but when i drive revearse with the car from my friend there shows only the pdc and when i push the idrove button then is vorhing . and on the left side is nö camera symbol RE: problem with bmw f10 rear camera coding - Fx82 - 13-02-2019 Do you got e-sys or an icom? If so I can have a look. RE: problem with bmw f10 rear camera coding - budddyyy - 14-02-2019 yes esys i have with enet cable but i dont know when the friend comes to me again ... i think in des days and for that i look for any options what i can do then |